SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI T 259 om-15 Species Identification of Nonwood Plant Fibers standard by Technical Association of the Pulp and Paper Industry, 04/21/2015 Full Description Revised as an Official Method - 2015The fibrous elements of the nonwood plant species, which are commonly...
TAPPI T248 sp-15 Laboratory Beating of Pulp (PFI Mill Method) standard by Technical Association of the Pulp and Paper Industry, 04/21/2015 Full Description This standard practice describes the processing of pulp by means of the PFI mill to evaluate pulp qualaity for...
TAPPI T 1015 sp-15 Fiberglass Mat Uniformity (Visual Defects) standard by Technical Association of the Pulp and Paper Industry, 04/15/2015 Full Description This method is a description of fiber glass mat attributes that define visual uniformity in the finished mat...
TAPPI UM 203 Freeness of pulp (Williams tester) standard by Technical Association of the Pulp and Paper Industry, 04/15/2015 Full Description The Williams freeness tester provides a means of measuring freeness of stock from a beater or other refining equipment. The...
TAPPI TIP 0304-53 Tests for Corrugator Roll Wear standard by Technical Association of the Pulp and Paper Industry, 04/10/2015 Full Description Singlefacer corrugator rolls are very important components in the corrugating process. They produce the fluted medium which is...
TAPPI TIP0402-18 Ultrasonic testing (UT) for tube thickness in black liquor recovery boilers: Part I - Guidelines for accurate tube thickness testing; Part II - Default layouts for tube thickness surveys in various boiler zones standard by Technical Association of the Pulp and Paper Industry, 04/10/2015...
TAPPI TIP 0416-24 Energy Checklist: Pulp Mill standard by Technical Association of the Pulp and Paper Industry, 04/03/2015 Full Description This Technical Information Paper provides an energy checklist for the pulp mill: from digesters through the washers, refining,...
TAPPI UM 205 Dirt in pulp (measured by transmitted light) standard by Technical Association of the Pulp and Paper Industry, 04/01/2015 Full Description This method supplements TAPPI T 213 "Dirt in Pulp," which measures dirt in mm/m (parts per million) as detected by...
TAPPI UM 658 Color strength and shade of dye standard by Technical Association of the Pulp and Paper Industry, 04/01/2015 Full Description The following methods are designed for the evaluation of dyes used for coloring paper in terms of a preselected dye referred to as...
TAPPI UM 411 Opacity of Paper Using 45 degree/0 degree Geometry Reflectometer standard by Technical Association of the Pulp and Paper Industry, 04/01/2015 Full Description The object of this method is to determine paper opacity by measuring the ratio of the reflectance...
TAPPI UM 3 Determination of useful fiber in bagasse standard by Technical Association of the Pulp and Paper Industry, 04/01/2015 Full Description This method describes a procedure for estimating the percentage of useful fiber, pith, and soluble matter inbagasse.Pith and...
TAPPI UM 258 Laboratory processing of pulp (Kollergang method) standard by Technical Association of the Pulp and Paper Industry, 04/01/2015 Full Description This method concerns the processing of pulp by means of a laboratory beating device, theKollergang, prior to...