SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI TIP 0404-04 Recommended Tensions in Dryer Fabrics standard by Technical Association of the Pulp and Paper Industry, 04/29/2015 Full Description The purpose of this Technical Information Paper is to provide guidelines for selecting operating tension for dryer...
TAPPI TIP0404-20 Physical characterization of press fabrics: Basis weight, air permeability, void volume under loading and pressure uniformity standard by Technical Association of the Pulp and Paper Industry, 04/27/2015 Full Description This Technical Information Paper...
TAPPI TIP 0404-64 Press Fabric Guiding standard by Technical Association of the Pulp and Paper Industry, 04/27/2015 Full Description This Technical Information Paper covers the principles of press fabric guiding. In addition, it provides general rules for preventing or...
TAPPI T 213 om-15 Dirt in Pulp - Chart Method standard by Technical Association of the Pulp and Paper Industry, 04/21/2015 Full Description This method is adapted to the numerical estimation of dirt in pulp and recycled pulp in terms of equivalent black area.The results...
TAPPI T 573 sp-15 Accelerated temperature aging of printing and writing paper by dry oven exposure apparatus standard by Technical Association of the Pulp and Paper Industry, 04/21/2015 Full Description This standard practice describes a laboratory procedure for...
TAPPI T 563 om-15 Equivalent Black Area (EBA) and Count of Visible Dirt in Pulp, Paper and Paperboard by Image Analysis standard by Technical Association of the Pulp and Paper Industry, 04/21/2015 Full Description This method uses image analysis to determine the level of...
TAPPI T 558 om-15 Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester standard by Technical Association of the Pulp and Paper Industry, 04/21/2015 Full Description The property of a liquid to adhere to, or "wet," a sheeted...
TAPPI T 555 om-15 Roughness of Paper and Paperboard (Print-Surf Method) standard by Technical Association of the Pulp and Paper Industry, 04/21/2015 Full Description This method measures the roughness of paper and paperboard under conditions intended to simulate the nip...
TAPPI T 546 om-15 Machine Direction Grammage Variation Measurement (Gravimetric Method) standard by Technical Association of the Pulp and Paper Industry, 04/21/2015 Full Description This procedure can be used to determine the short term machine-direction variation in...
TAPPI T 454 om-15 Turpentine Test for Voids in Glassine and Greaseproof Papers standard by Technical Association of the Pulp and Paper Industry, 04/21/2015 Full Description This method gives an accelerated comparison of the relative rates at which oils or greases, such...
TAPPI T 409 sp15 Machine Direction of Paper and Paperboard standard by Technical Association of the Pulp and Paper Industry, 04/21/2015 Full Description This Standard Practice describes several procedures for determining the machine direction of most grades of paper and...
TAPPI T401 om-15 Fiber Analysis of Paper and Paperboard standard by Technical Association of the Pulp and Paper Industry, 04/21/2015 Full Description This method provides a procedure for the identification of the kinds of fibers present in a sample of paper or paperboard...