SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI UM 596 Water absorbency of nonbibulous paperboard standard by Technical Association of the Pulp and Paper Industry, 03/13/2015 Full Description This method is used to determine the rate of water absorption of an unsized or slack-sized paperboard. It is generally...
TAPPI TIP 0304-75 Checking the Flute Depth of Corrugating Rolls standard by Technical Association of the Pulp and Paper Industry, 03/02/2015 Full Description This TIP will address the measurement of chordal flute depth defined as the perpendicular distance from the...
TAPPI TIP0416-07 Evaluating reverse osmosis for treating makeup to the boiler feedwater in a pulp and paper mill standard by Technical Association of the Pulp and Paper Industry, 02/20/2015 Full Description Reverse osmosis (RO) technology is consistently improving,...
TAPPI TIP 0416-10 Stripping of kraft pulping process condensates: regulations, design and operation standard by Technical Association of the Pulp and Paper Industry, 02/01/2015 Full Description Basic regulations concerning the collection and stripping of foul pulping...
TAPPI TIP 0402-38 Best practice guidelines for detecting and mitigating waterside cracking (stress-assisted corrosion) in power and recover boilers standard by Technical Association of the Pulp and Paper Industry, 2015 Full Description This Technical Information Paper...
TAPPI T 509 om-15 Hydrogen Ion Concentration (pH) of Paper Extracts (Cold Extraction Method) standard by Technical Association of the Pulp and Paper Industry, 2015 Full Description TAPPI T 509 om-15 measures the hydrogen ion concentration of a cold aqueous extract...
TAPPI T 489 om-15 Bending Resistance (Stiffness) of Paper and Paperboard (Taber-Type Tester in Basic Configuration) standard by Technical Association of the Pulp and Paper Industry, 2015 Full Description TAPPI T 489 om-15 covers a procedure used to measure the resistance...
TAPPI T 480 om-15 Specular Gloss of Paper and Paperboard at 75 Degrees standard by Technical Association of the Pulp and Paper Industry, 2015 Full Description TAPPI T 480 om-15 is for measuring the specular gloss of paper at 75 (15 from the plane of paper). Although its...
TAPPI T 411 om-15 Thickness (Caliper) of Paper, Paperboard, & Combined Board standard by Technical Association of the Pulp and Paper Industry, 2015 Full Description TAPPI T 411 om-15 describes the procedure for measuring single-sheet thickness and variations in...
TAPPI T 403 om-15 Bursting Strength of Paper standard by Technical Association of the Pulp and Paper Industry, 2015 Full Description TAPPI T 403 om-15 is designed to measure the maximum bursting strength of paper and paper products having a bursting strength of 50 kPa up...
TAPPI T 267 cm-15 Compression Wood Identification in Pulpwood standard by Technical Association of the Pulp and Paper Industry, 2015 Full Description TAPPI T 267 cm-15 is concerned with the detection of the compression wood that can be recognized by unaided vision or by...
TAPPI T 233 cm-15 Fiber Length of Pulp by Classification standard by Technical Association of the Pulp and Paper Industry, 2015 Full Description TAPPI T 233 cm-15 is designed to measure the weighted average fiber length of a pulp. If a fiber is 1 mm in length and weighs...