SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI TIP0404-60 High vacuum sheet dewatering standard by Technical Association of the Pulp and Paper Industry, 08/04/2015 Full Description This TIP outlines procedures for determining the water removal performance of the flat box section of sheetformers. The objective...
TAPPI TIP 0420-13 Guidelines for side-entering stock agitators standard by Technical Association of the Pulp and Paper Industry, 07/17/2015 Full Description This paper provides guidelines for pulp, paper, and allied industry personnel for a better understanding of the...
TAPPI TIP 0402-16 Guidelines for inspection and nondestructive testing of cast iron paper machine dryers standard by Technical Association of the Pulp and Paper Industry, 07/13/2015 Full Description This Technical Information Paper (TIP) provides guidelines for...
TAPPI UM 256 Water retention value (WRV) standard by Technical Association of the Pulp and Paper Industry, 07/01/2015 Full Description Water retention value is a measure of the water retained by a wet pulp specimen after centrifuging understandard conditions.Water...
TAPPI UM 823 Testing adhesives used in glued lap joints of corrugated fiberboard containers standard by Technical Association of the Pulp and Paper Industry, 06/17/2015 Full Description This useful method describes processes for evaluating the adhesive used in glued lap...
TAPPI T 1008 sp-15 Test Conditions for Fiber Glass Mat Test Methods standard by Technical Association of the Pulp and Paper Industry, 05/12/2015 Full Description This method defines the test conditions for testing fiber glass mats. Product...
TAPPI UM 542 Amount of coating on mineral-coated paper standard by Technical Association of the Pulp and Paper Industry, 05/06/2015 Full Description This method is suitable for the ordinary types of mineral coatings. It may not be effective for special types, such as...
TAPPI UM 555 Testing of grease-repellant treated paper standard by Technical Association of the Pulp and Paper Industry, 05/06/2015 Full Description This method describes a procedure for testing grease repellency of flexible packaging materials. It is an accelerated...
TAPPI UM 554 Polystyrene in paper products standard by Technical Association of the Pulp and Paper Industry, 05/06/2015 Full Description These procedures are applicable to paper modified with polystyrene. Two alternative methods can be used: ultraviolet and...
TAPPI TIP0404-02 Mearurement of dryer condensing rates (batch method) standard by Technical Association of the Pulp and Paper Industry, 04/29/2015 Full Description This Technical Information Paper outlines a method to measure condensing rates and blowthrough steam flows...
TAPPI TIP 0410-05 Head of Stock Behind Slice (Head/Jet and Slice Flow Rate Relationships) standard by Technical Association of the Pulp and Paper Industry, 04/29/2015 Full Description The scope of this Technical Information Paper is to provide the relationship between...
TAPPI TIP 0404-50 Paper Machine Room Ventilation Guidelines standard by Technical Association of the Pulp and Paper Industry, 04/29/2015 Full Description This Technical Information Paper provides an overview of principles and guidelines for designing and optimizing paper...