SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI UM 253 Laboratory processing of pulp (ball or pebble-mill method) standard by Technical Association of the Pulp and Paper Industry, 04/01/2015 Full Description This method concerns the processing of pulp by means of a laboratory ball or pebble-mill prior to...
TAPPI UM 23 Bulk density of wood chips standard by Technical Association of the Pulp and Paper Industry, 04/01/2015 Full Description This method is used to determine the weight on a moisture-free basis per unit volume of wet wood chips, the bulkdensity. For purposes of...
TAPPI UM 221 Laboratory processing of pulp (plate refiner) standard by Technical Association of the Pulp and Paper Industry, 04/01/2015 Full Description This method concerns the processing of pulp by means of a laboratory plate refiner prior to forming handsheets, forthe...
TAPPI TIP0416-11 Recommended test procedure for black liquor evaporators standard by Technical Association of the Pulp and Paper Industry, 03/31/2015 Full Description Procedures used to measure the performance of black liquor evaporators and concentrators have frequently...
TAPPI UM 240 Shive content of mechanical pulp (laboratory flat screen) standard by Technical Association of the Pulp and Paper Industry, 03/30/2015 Full Description The objective of this method is to determine the harmful shive content of mechanical pulps by screening on...
TAPPI UM 242 Shive content of mechanical pulp (Somerville fractionator) standard by Technical Association of the Pulp and Paper Industry, 03/30/2015 Full Description This method for shive determination makes no attempt to classify the undesirable material in detail, but...
TAPPI TIP 0502-15 Selection Criteria for Wet End Ceramics standard by Technical Association of the Pulp and Paper Industry, 03/24/2015 Full Description The choice of ceramic materials for paper machine wet ends is a difficult. This TIP is intended to introduce and...
TAPPI UM 566 Wetting Shipping Sack Paper for Testing standard by Technical Association of the Pulp and Paper Industry, 03/23/2015 Full Description This method is applicable to the preliminary treatment of shipping sack paper prior to testing its properties when wet....
TAPPI TIP 0410-08 Control of stock activity on a fourdrinier table standard by Technical Association of the Pulp and Paper Industry, 03/19/2015 Full Description The scope of this Technical Information Paper is to give an overview of the various factors that affect stock...
TAPPI UM 573 Water vapor permeability of sheet materials at -18 degrees C (0 degrees F) standard by Technical Association of the Pulp and Paper Industry, 03/18/2015 Full Description This method is for the determination of water vapor permeability of paper, paperboard,...
TAPPI UM 590 Creasing (using steel rules) of paperboard for water vapor transmission (WVTR) testing standard by Technical Association of the Pulp and Paper Industry, 03/18/2015 Full Description This method is intended to provide a standard creasing procedure using...
TAPPI UM 579 Water Repellence of paper and boards standard by Technical Association of the Pulp and Paper Industry, 03/16/2015 Full Description This method describes a procedure for measuring water repellence of paper, paperboard, or combined board which has been treated...