SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI T 419 om-11 Starch in Paper standard by Technical Association of the Pulp and Paper Industry, 01/01/2011 Full Description Scope1.1 This method describes the qualitative and the quantitative determination of unmodified starches andstarches modified only by...
TAPPI T 413 om-11 Ash in Wood, Pulp, Paper and Paperboard: Combustion at 900 Degrees C standard by Technical Association of the Pulp and Paper Industry, 01/01/2011 Full Description This method for determination of ash can be applied to all types of wood, pulp, paper and...
TAPPI TIP 0305-13 Project Leader standard by Technical Association of the Pulp and Paper Industry, 12/01/2010 Full Description A project leader is the person who coordinates the advance preparation, receipt, installation, training,startup, and operating shakedown of the...
TAPPI TIP 0410-09 Flow Determination by Chemical Method standard by Technical Association of the Pulp and Paper Industry, 12/01/2010 Full Description In many instances, it is inconvenient to install a weir or other flow measuring device to determine the massflow rate of...
TAPPI TIP 0304-07 Warp in Corrugated Board standard by Technical Association of the Pulp and Paper Industry, 12/01/2010 Full Description Why cross direction warp in corrugated board occurs and how to correct it. Product Details...
TAPPI T 220 sp-10 Physical Testing of Pulp Handsheets standard by Technical Association of the Pulp and Paper Industry, 11/01/2010 Full Description 1.1 This procedure describes the testing of pulp handsheets, prepared in accordance with TAPPI T 205Forming Handsheets for...
TAPPI T 465 sp-10 Static Creasing of paper for Water Vapor Transmission Tests standard by Technical Association of the Pulp and Paper Industry, 11/01/2010 Full Description This standard practice is used for the creasing of paper and other thin sheet materials to...
TAPPI T 454 om-10 Turpentine Test for Voids in Glassine and Greaseproof Papers standard by Technical Association of the Pulp and Paper Industry, 11/01/2010 Full Description This method gives an accelerated comparison of the relative rates at which oils or greases, such...
TAPPI T 434 cm-10 Acid-Soluble Iron in Paper standard by Technical Association of the Pulp and Paper Industry, 11/01/2010 Full Description Acid-soluble iron is considered that portion of the iron present which is potentially chemically reactive, as distinguished from the...
TAPPI T 429 cm-10 Alpha-Cellulose in Paper standard by Technical Association of the Pulp and Paper Industry, 2010 Full Description This method describes a procedure for determining the alpha-cellulose in paper. Alpha-cellulose is empirically defined as the fraction that...
TAPPI T261 cm-10 Fines Fraction by Weight of Paper Stock by Wet Screening standard by Technical Association of the Pulp and Paper Industry, 2010 Full Description This method is designed to measure the fines content of paper stock or of pulp samples by means of a...
TAPPI T 223 cm-10 Pentosans in Wood and Pulp standard by Technical Association of the Pulp and Paper Industry, 2010 Full Description This method for determination of pentosan content can be applied to both wood and to unbleached or bleached pulps....