SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI T 617 cm-10 Analysis of Lime standard by Technical Association of the Pulp and Paper Industry, 01/01/2010 Full Description "Available lime index," expressed as a percentage of calcium oxide, is a measure of the alkaline contentof high calcium quicklime and hydrated...
TAPPI T 562 om-10 CIE whiteness and tint of paper and paperboard (45/0 geometry, C/2 illuminant/observer) standard by Technical Association of the Pulp and Paper Industry, 01/01/2010 Full Description This method is to be used to determine the CIE whiteness and tint...
TAPPI T 553 om-10 Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper) standard by Technical Association of the Pulp and Paper Industry, 01/01/2010 Full Description This test method covers the determination of the alkalinity and/or alkaline reserve of...
TAPPI T 456 om-10 Tensile breaking strength of water-saturated paper and paperboard (“wet tensile strength”) standard by Technical Association of the Pulp and Paper Industry, 01/01/2010 Full Description This method describes the procedure for the determination of the...
TAPPI T 431 cm-10 Ink Absorbency of Bibulous Paper standard by Technical Association of the Pulp and Paper Industry, 01/01/2010 Full Description This method is used to determine the rate at which blotting papers absorb writing ink. It yields results that have been found...
TAPPI T 411 om-10 Thickness (Caliper) of Paper, Paperboard, & Combined Board standard by Technical Association of the Pulp and Paper Industry, 01/01/2010 Full Description This method describes the procedure for measuring single-sheet thickness and variations in...
TAPPI TIP 0404-38 Dryer Fabric Cleaning standard by Technical Association of the Pulp and Paper Industry, 12/09/2009 Full Description This Technical Information Paper lists and briefly describes various methods for cleaning dryer fabrics....
TAPPI TIP 0304-58 An Explanation of the CONEG Heavy Metal Guidelines standard by Technical Association of the Pulp and Paper Industry, 12/02/2009 Full Description To provide updated CONEG Heavy Metal Guidelines for the Packaging Industry....
TAPPI TIP 0305-54 Material Handling Considerations for Flexo Folder Gluers standard by Technical Association of the Pulp and Paper Industry, 12/02/2009 Full Description When selecting a flexo folder gluer (FFG), a consideration of equal importance is the selection of the...
TAPPI TIP 0502-16 Pilot Paper Machines (Corrected November 2009) standard by Technical Association of the Pulp and Paper Industry, 11/01/2009 Full Description Includes Correction to Third Revision.This is the 3rd revision in 2009.This Technical Information Paper (TIP)...
TAPPI T 462 cm-06 Castor Oil Penetration Test for Paper standard by Technical Association of the Pulp and Paper Industry, 10/08/2009 Full Description This standard is a corrected version of T 462 om-06.CORRECTION--OCTOBER 8, 2009An editorial correction has been...
TAPPI T 461 cm-09 (R2009) Flame Resistance of Treated Paper and Paperboard standard by Technical Association of the Pulp and Paper Industry, 10/01/2009 Full Description This standard reaffirms T 461 cm-00, published in 2000.This procedure describes a method for testing...