SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI TIP 0502-13 Retention Definitions standard by Technical Association of the Pulp and Paper Industry, 10/01/2010 Full Description Define the meanings of the retention terms commonly used in the papermaking process, these being first pass, true, and comprehensive...
TAPPI T 213 om-10 Dirt in Pulp - Chart Method standard by Technical Association of the Pulp and Paper Industry, 10/01/2010 Full Description This method (1, 2) is adapted to the numerical estimation of dirt in pulp and recycled pulps in terms of equivalent black area.The...
TAPPI T 200 sp-10 Laboratory Beating of Pulp (Valley Beater Method) standard by Technical Association of the Pulp and Paper Industry, 10/01/2010 Full Description 1.1 This procedure is used to define the papermaking quality of pulp, by subjecting it to a...
TAPPI T 844 pm-10 Determining construction (nominal basis weight) of corrugated board standard by Technical Association of the Pulp and Paper Industry, 10/01/2010 Full Description This PDF includes editorial corrections to equations in sections 7.7.1 and 7.7.2, December...
TAPPI TIP 0304-75 Checking the Flute Depth of Corrugating Rolls standard by Technical Association of the Pulp and Paper Industry, 09/01/2010 Full Description This TIP will address the measurement of chordal flute depth defined as the perpendicular distance from thelowest...
TAPPI TIP 0420-14 Guide for increasing the maximum allowable working pressure of cast iron, ASME constructed paper machine dryers standard by Technical Association of the Pulp and Paper Industry, 06/01/2010 Full Description The intent of this document is to provide a...
TAPPI TIP 0402-16 Guidelines for Iion and Nondestructive Examination of Paper Machine Dryers standard by Technical Association of the Pulp and Paper Industry, 06/01/2010 Full Description This Technical Information Paper (TIP) provides guidelines for inspecting modern (c....
TAPPI TIP 0402-13 Guidelines for Specification and Iion of Electric Resistance Welded (ERW) and Seamless Boiler Tube for Critical and Noncritical Service' standard by Technical Association of the Pulp and Paper Industry, 01/01/2010 Full Description This Technical...
TAPPI T 403 om-10 Bursting Strength of Paper standard by Technical Association of the Pulp and Paper Industry, 01/01/2010 Full Description This method is designed to measure the maximum bursting strength of paper and paper products having a burstingstrength of 50 kPa up...
TAPPI TIP 0404-57 Troubleshooting Cross-Machine Direction Moisture Profile Problems standard by Technical Association of the Pulp and Paper Industry, 01/01/2010 Full Description Poor cross-machine direction (CD) moisture profiles result in non-uniform paper end-use...
TAPPI TIP 0404-07 Paper Machine Drying Rate standard by Technical Association of the Pulp and Paper Industry, 01/01/2010 Full Description This TIP outlines procedures for calculating paper machine drying rates for coated and uncoated papers andprovides drying rate...
TAPPI T 619 cm-10 Analysis of Salt Cake standard by Technical Association of the Pulp and Paper Industry, 01/01/2010 Full Description The principal use of salt cake in the pulp and paper industry is in the manufacture of sulfate pulp. Salt cake is an anhydrous sodium...