SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI TIP0606-28 Gaseous Ozone (O3) Safe Handling standard by Technical Association of the Pulp and Paper Industry, 01/01/2012 Full Description This TIP provides basic information for personnel for the safe handling and use of ozone. It is vitally important that any new...
TAPPI TIP0305-40 Reduction of Ink Smear on Rotary Diecutting standard by Technical Association of the Pulp and Paper Industry, 2011 Full Description The technical information contained herein identifies the various methods available to the flexographic converter toreduce...
TAPPI T 509 om-11 Hydrogen Ion Concentration (pH) of Paper Extracts (Cold Extraction Method) standard by Technical Association of the Pulp and Paper Industry, 06/01/2011 Full Description This method measures the hydrogen ion concentration of a cold aqueous extract...
TAPPI T 807 om-11 Bursting Strength of Linerboard standard by Technical Association of the Pulp and Paper Industry, 06/01/2011 Full Description Scope and summary1.1 This method describes a procedure for measuring the bursting strength of linerboard using a disk...
TAPPI T 632 cm-11 Analysis of Sodium Silicate standard by Technical Association of the Pulp and Paper Industry, 06/01/2011 Full Description 1.1 The sodium silicates in general use in the paper industry consist of chemical combinations of SiO2 andNa2O in ratios varying...
TAPPI T 564 sp-11 Transparent Chart for the Estimation of Defect Size standard by Technical Association of the Pulp and Paper Industry, 06/01/2011 Full Description There are many applications when it is desired to measure the size of spots, defects or inclusions in paper...
TAPPI T 545 om-11 Cross-Machine Grammage Profile Measurement (Gravimetric Method) standard by Technical Association of the Pulp and Paper Industry, 06/01/2011 Full Description This method describes a procedure which can be applied to determine the varia-tion in mass per...
TAPPI T218 sp-11 Forming Handsheets for Reflectance Testing of Pulp (Buchner Funnel Procedure standard by Technical Association of the Pulp and Paper Industry, 05/01/2011 Full Description This standard practice describes the calibration of standards for hemispherical...
TAPPI T 222 om-11 Acid-Insoluble Lignin in Wood and Pulp standard by Technical Association of the Pulp and Paper Industry, 05/01/2011 Full Description This method describes a procedure which can be applied to the determination of acid-insoluble lignin in wood and in all...
TAPPI TIP 0304-08 Questions and Answers on Gel Temperatures and on the Gel Temperature Test for Corrugating Adhesives standard by Technical Association of the Pulp and Paper Industry, 04/01/2011 Full Description The gel temperature is the temperature at which a...
TAPPI TIP 0404-04 Recommended Tensions in Dryer Fabrics standard by Technical Association of the Pulp and Paper Industry, 04/01/2011 Full Description The purpose of this Technical Information Paper is to provide guidelines for selecting operating tension for dryer...
TAPPI TIP 0402-34 Paper Machine Reel Spool Journals: Guidelines for the In-Service Inspection to Detect Cracking and Repair/Replacement Considerations standard by Technical Association of the Pulp and Paper Industry, 04/01/2011 Full Description This document was created...