SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI TIP 0416-02 Definitions of Black Liquor Recovery Furnace Availability standard by Technical Association of the Pulp and Paper Industry, 2017 Full Description TAPPI TIP 0416-02 is intended to provide guidance for report of black liquor recovery boiler availability....
TAPPI TIP 0404-33 Dryer Section Performance Monitoring standard by Technical Association of the Pulp and Paper Industry, 2017 Full Description Dryer section performance has a major effect on production rates, energy efficiency, and sheet quality. Regularperformance...
TAPPI TIP 0404-28 Method for Evaluating Thickness of Wet Press Fabrics standard by Technical Association of the Pulp and Paper Industry, 2017 Full Description In TAPPI TIP 0404-28, a method is described for measuring press fabric thickness using a hand-held caliper...
TAPPI TIP 0404-07 Paper Machine Drying Rate standard by Technical Association of the Pulp and Paper Industry, 2017 Full Description TAPPI TIP 0404-07 outlines procedures for calculating paper machine drying rates for coated and uncoated papers and provides drying rate...
TAPPI TIP 0402-28 Guidelines for Inspecting Used FRP Equipment standard by Technical Association of the Pulp and Paper Industry, 2017 Full Description TAPPI TIP 0402-28 describes how used iber-reinforced plastic (FRP) tanks and vessels should be formally inspected to...
TAPPI TIP 0402-15 Installation and Repair of Pin Studs in Black Liquor Recovery Boilers standard by Technical Association of the Pulp and Paper Industry, 2016 Full Description TAPPI TIP 0402-15 provides guidelines for achieving an acceptable level of weld quality during...
TAPPI T 263 sp-16 Identification of wood and fibers from conifers standard by Technical Association of the Pulp and Paper Industry, 2016 Full Description TAPPI T 263 sp-16 deals with the identification of wood from conifers and also permits determination of theconiferous...
TAPPI T 258 om-16 Basic Denisty and Moisture Content of Pulpwood standard by Technical Association of the Pulp and Paper Industry, 2016 Full Description TAPPI T 258 om-16 describes the measurement of the basic density (bone-dry weight per unit of maximum volume) of...
TAPPI T 252 om-16 pH and Electrical Conductivity of Hot Water Extracts of Pulp, Paper and Paperboard standard by Technical Association of the Pulp and Paper Industry, 2016 Full Description TAPPI T 252 om-16 provides for the extraction of pulp, paper, and paperboard...
TAPPI T 220 sp-16 Physical Testing of Pulp Handsheets standard by Technical Association of the Pulp and Paper Industry, 2016 Full Description TAPPI T 220 sp-10 describes the testing of pulp handsheets, prepared in accordance with TAPPI T 205Forming Handsheets for...
TAPPI T 211 om-16 Ash in Wood, Pulp, Paper and Paperboard: Combustion at 525 Degrees C standard by Technical Association of the Pulp and Paper Industry, 2016 Full Description TAPPI T 211 om-16 can be applied to all types and grades of wood pulp paper, and paper products....
TAPPI TIP 0502-20 Catalog of Stock Prep Pilot Plants standard by Technical Association of the Pulp and Paper Industry, 2016 Full Description TAPPI TIP 0502-20 contains information or stock preparation pilot plant facilities which can be used for contract, cooperative,...