SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI TIP 0420-14 Guide for increasing the maximum allowable working pressure of cast iron, ASME constructed paper machine dryers standard by Technical Association of the Pulp and Paper Industry, 2018 Full Description The intent of TAPPI TIP 0420-14 is to provide a guide...
TAPPI TIP 0404-25 Through Drying standard by Technical Association of the Pulp and Paper Industry, 10/01/2018 Full Description Information in TAPPI TIP 0404-25 serves as a general outline of conventional through air dryer machine parameters. Considerable progress has...
TAPPI TIP 0404-17 Recommended minimum dryer pocket air requirements standard by Technical Association of the Pulp and Paper Industry, 2018 Full Description TAPPI TIP 0404-17 provides instructions for calculating the theoretical air volumerequirements to achieve...
TAPPI T 839 om-18 Edgewise Compressive Strength of Corrugated Fiberboard Using the Clamp Method (Short Column Test) standard by Technical Association of the Pulp and Paper Industry, 2018 Full Description TAPPI T 839 om-18 describes procedures for determining the edgewise...
TAPPI T 830 om-18 Ink rub test of container board and corrugated board standard by Technical Association of the Pulp and Paper Industry, 2018 Full Description TAPPI T 830 om-18: Ink rub testers are designed to evaluate the scuffing or rubbing resistance of an ink film or...
TAPPI T 452 om-18 Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm) standard by Technical Association of the Pulp and Paper Industry, 2018 Full Description TAPPI T 452 om-18 is for the determination of the brightness of white, near-white, and...
TAPPI T 419 om-18 Starch in Paper standard by Technical Association of the Pulp and Paper Industry, 2018 Full Description TAPPI T 419 om-18 describes the qualitative and the quantitative determination of unmodified starches andstarches modified only by conventional...
TAPPI T 281 sp-18 Open drum washer mat sampling technique standard by Technical Association of the Pulp and Paper Industry, 2018 Full Description TAPPI T 281 sp-18 provides a means to collect pulp mat and liquor samples from open drum washers....
TAPPI TIP 0404-49 Yankee Dryer Steam Condensing Rates standard by Technical Association of the Pulp and Paper Industry, 04/01/2018 Full Description TAPPI TIP 0404-49 defines the area basis for condensing rate calculations, references separator rise-time method for...
TAPPI TIP 0808-04 Paper test rooms: design considerations standard by Technical Association of the Pulp and Paper Industry, 01/01/2018 Full Description TAPPI TIP 0808-04 is to recommend construction and performance requirements for testing equipment in the design of a...
TAPPI TIP 0416-06 Keys to successful chemical cleaning of boilers standard by Technical Association of the Pulp and Paper Industry, 2018 Full Description TAPPI TIP 0416-06 is designed to answer the question, "How do we avoid having failures in chemical cleaning of...
TAPPI TIP 0408-01 Checklist for a Properly Planned Project standard by Technical Association of the Pulp and Paper Industry, 2018 Full Description TAPPI TIP 0408-01 is an instrument for guiding and auditing the planning phase of capital project development. It can be...