SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI T 282 om-19 Hexeneuronic Acid Content of Chemical Pulp standard by Technical Association of the Pulp and Paper Industry, 2019 Full Description This method describes a procedure to determine hexeneuronic acid groups (HexA) in chemical pulps. HexA affects the kappa...
TAPPI T 230 om-19 Viscosity of Pulp (Capillary Viscometer Method) standard by Technical Association of the Pulp and Paper Industry, 2019 Full Description This method describes a procedure for determining the viscosity of 0.5% cellulose solutions, using 0.5M...
TAPPI TIP0404-27 Press Fabric Dewatering and Conditioning - Suction Box (Uhle box) Design and Vacuum Requirements standard by Technical Association of the Pulp and Paper Industry, 2019 Full Description Design considerations for dewatering press fabrics to permit...
TAPPI TIP0420-12 Guidelines for Evaluation of Liquid Ring Vacuum Pump Performance standard by Technical Association of the Pulp and Paper Industry, 2019 Full Description TAPPI TIP0420-12 is provided to assist in evaluating performance of single stage, liquid ringvacuum...
TAPPI TIP 0425-06 Guidelines and Procedures for Inspections and Maintenance of Yankee Dryer Doctor Systems standard by Technical Association of the Pulp and Paper Industry, 2019 Full Description TAPPI TIP 0425-06 provides guidelines and procedures for basic creping...
TAPPI TIP 0402-22 Guidelines for Inspecting Batch Digesters standard by Technical Association of the Pulp and Paper Industry, 2019 Full Description TAPPI TIP 0402-22 provides guidelines for inspecting batch digesters in pulp mills. Itdescribes damage mechanisms and...
TAPPI T218 sp-18 Forming Handsheets for Reflectance Testing of Pulp (Buchner Funnel Procedure) standard by Technical Association of the Pulp and Paper Industry, 11/01/2018 Full Description This standard practice describes the calibration of standards for hemispherical...
TAPPI T1501 sg-18 Training standard for paper machine tender standard by Technical Association of the Pulp and Paper Industry, 2018 Full Description The purpose of this standard is to provide guidelines for skills and knowledge needed by a paper machinetender, often...
TAPPI T 266 om-18 Determination of Sodium, Calcium, Copper, Iron, and Manganese in Pulp and Paper by Atomic Absoption Spectroscopy standard by Technical Association of the Pulp and Paper Industry, 11/01/2018 Full Description This method describes the determination of...
TAPPI TIP 0402-19 Guidelines for Nondestructive Examination of Suction Roll Shells standard by Technical Association of the Pulp and Paper Industry, 2018 Full Description TAPPI TIP 0402-19 is to provide technical guidance for nondestructive examination of suction roll...
TAPPI TIP 0402-21 Ultrasonic Technician Performance Test for Boiler Tube Inspection standard by Technical Association of the Pulp and Paper Industry, 2018 Full Description TAPPI TIP 0402-21 has been developed by a TAPPI Task Group to offer a basis for evaluating the...
TAPPI TIP 0425-05 Guidelines for Usage of MAP on Raw Yankee Surfaces standard by Technical Association of the Pulp and Paper Industry, 2018 Full Description TAPPI TIP 0425-05 will provide general guidelines for the usage of MAP to protect raw Yankee dryer surfaces after...