SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI T 272 sp-12 Forming Handsheets for Reflectance Testing of Pulp (Sheet Machine Procedure) standard by Technical Association of the Pulp and Paper Industry, 11/01/2012 Full Description This practice describes the procedure using the TAPPI sheet machine for preparing...
TAPPI T234 cm-12 Coarseness of pulp fibers standard by Technical Association of the Pulp and Paper Industry, 11/01/2012 Full Description This is a method by which the coarseness (weight per unit length) of the fibers in a pulp may beascertained by counting the crossings...
TAPPI T 1500 gl-12 (R2018) Optical Measurements Terminology (Related to Appearance Evaluation of Paper) standard by Technical Association of the Pulp and Paper Industry, 11/01/2012 Full Description This glossary defines terms used in the pulp and paper industry relating...
TAPPI T483 cm-12 Odor of Packaging Materials standard by Technical Association of the Pulp and Paper Industry, 11/01/2012 Full Description The presence of foreign or objectionable odors in packaging materials which are to be used near food, drugs, etc., may be a serious...
TAPPI T271-12 (R2018) Fiber Lenth of Pulp and Paper by Automated Optical Analyzer Using Polarized Light standard by Technical Association of the Pulp and Paper Industry, 11/01/2012 Full Description This is an automated method by which the numerical and weighted average...
TAPPI UM 822 Green Peel Bond Procedure at the Corrugator standard by Technical Association of the Pulp and Paper Industry, 2012 Full Description This procedure is to provide basic instructions for subjective testing of the corrugated bond at both the single facer and...
TAPPI TIP0306-11 Quality Techniques using Existing Printing Equipment standard by Technical Association of the Pulp and Paper Industry, 2012 Full Description The purpose of this Technical Information Paper is to identify management initiatives to maximize theperformance...
TAPPI TIP 0304-16 Evaluating Glue Lap Adhesives standard by Technical Association of the Pulp and Paper Industry, 2012 Full Description TIP 0304-16 The scope of this technical information sheet is to outline the various tests one can use in evaluating the glue lap...
TAPPI TIP 0402-19 Guidelines for Nondestructive Examination of Suction Roll Shells standard by Technical Association of the Pulp and Paper Industry, 2012 Full Description The purpose of this Technical Information Paper is to provide technical guidance for nondestructive...
TAPPI TIP0420-12 Guidelines for Evaluation of Liquid Ring Vacuum Pump Performance standard by Technical Association of the Pulp and Paper Industry, 2012 Full Description This Technical Information Paper is provided to assist in evaluating performance of single stage,...
TAPPI TIP 0304-50 Techniques to Minimize Twist Warp standard by Technical Association of the Pulp and Paper Industry, 07/31/2012 Full Description This purpose of this TIP is to establish definitions of twist warp, and help understand the causes of warp, andtwist warp....
TAPPI TIP0306-15 Identifying Anilox Roll Volume Measuring Equipment standard by Technical Association of the Pulp and Paper Industry, 07/31/2012 Full Description Identifies the various types of anilox roll volume measuring equipment and devices that anilox roll...