SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI TIP 0502-01 Paper Machine Vacuum Selection Factors standard by Technical Association of the Pulp and Paper Industry, 2013 Full Description The purpose of this Technical Information Paper (TIP) is to provide a reference basis from which paper machinevacuum system...
TAPPI TIP 0404-49 Yankee Dryer Steam Condensing Rates standard by Technical Association of the Pulp and Paper Industry, 01/01/2013 Full Description This technical information paper defines the area basis for condensing rate calculations, references separator rise-time...
TAPPI TIP 0402-36 Guidelines for detection, monitoring and prevention of flow accelerated corrosion (FAC) in the pulp and paper mill standard by Technical Association of the Pulp and Paper Industry, 2013 Full Description This Technical Information Paper provides...
TAPPI TIP 0502-20 CAtalog of Stock Prep Pilot Plants standard by Technical Association of the Pulp and Paper Industry, 2013 Full Description This Technical Information Paper (TIP) contains information or stock preparation pilot plant facilities which can beused for...
TAPPI TIP 0502-16 Pilot Paper Machines standard by Technical Association of the Pulp and Paper Industry, 2013 Full Description This Technical Information Paper (TIP) contains information on pilot paper machines and wet-laid nonwoven used forcontract, cooperative,...
TAPPI TIP 0502-14 Forming Section Monitoring standard by Technical Association of the Pulp and Paper Industry, 2013 Full Description Instrumentation to measure, monitor, and troubleshoot the wet end of the paper machine is widely used to increasethe knowledge of the...
TAPPI T512 sp-12 Creasing of Flexible Packaging Material Paper Specimens for Testing standard by Technical Association of the Pulp and Paper Industry, 11/01/2012 Full Description This standard practice describes a creasing procedure for tests requiring creased specimens...
TAPPI T 205 sp-12 (R2018) Forming Handsheets for Physical Tests of Pulp standard by Technical Association of the Pulp and Paper Industry, 11/01/2012 Full Description This procedure describes a method of forming test handsheets at an oven dry weight of 60 g/m2 for...
TAPPI T 437 om-12 Dirt in Paper and Paperboard standard by Technical Association of the Pulp and Paper Industry, 11/01/2012 Full Description This method is suited for the visual estimation of dirt in paper or paperboard in terms of equivalent black area. For dirt in...
TAPPI T 262 sp-12 (R2018) Preparation of Mechanical Pulps for Testing standard by Technical Association of the Pulp and Paper Industry, 2012 Full Description TAPPI T 262 sp-12 (R2018) describes a procedure for the preparation of mechanical pulps prior to physical...
TAPPI T414 om-12 Internal Tearing Resistance of Paper (Elmendorf-Type Method) standard by Technical Association of the Pulp and Paper Industry, 11/01/2012 Full Description This method measures the force perpendicular to the plane of the paper required to tear multiple...
TAPPI T257 sp-12 Sampling and Preparing Wood for Analysis standard by Technical Association of the Pulp and Paper Industry, 11/01/2012 Full Description This method is applicable to the sampling of wood for all chemical tests. The procedures given describe the sampling...