SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
SECTION IIMATERIALSPart DProper ties...
TAPPI TIP0605-01 Grinder Pulpstones - Cubical Contents standard by Technical Association of the Pulp and Paper Industry, 03/16/2004 Full Description This TIP table provides the calculated volume of grinder pulpstones for specific stone diameters. Volumes are listed per...
TAPPI TIP0305-02 Maintenance on Computer-Assisted Machinery standard by Technical Association of the Pulp and Paper Industry, 2004 Full Description Computer-assisted machinery is in common use in boxplants. In order for the box manufacturer to get the full benefits of...
TAPPI TIP0605-02 Pulpstone Speed Chart standard by Technical Association of the Pulp and Paper Industry, 03/16/2004 Full Description This chart allows the user to easily determine the surface speed of a pulpstone by knowing the stone diameter and operating RPM. The stone...
TAPPI T 826 Short Span Compressive Strength of Paperboard standard by Technical Association of the Pulp and Paper Industry, 03/01/2004 Full Description This method describes a procedure for determining the compressive resistance of containerboard.This method is intended...
TAPPI T 526 Blister Resistance of Coated Paper in Heatset Printing standard by Technical Association of the Pulp and Paper Industry, 03/01/2004 Full Description This method is used to measure the resistance of coated paper and coated board to blistering in the ovens of...
TAPPI T 555 Roughness of Paper and Paperboard (Print Surf Method) standard by Technical Association of the Pulp and Paper Industry, 03/01/2004 Full Description This method measures the roughness of paper and paperboard under conditions intended to simulate the contact...
TAPPI T657 Sampling of Fillers and Pigments standard by Technical Association of the Pulp and Paper Industry, 03/01/2004 Full Description This document describes procedures for sampling shipments of fillers, pigments, and other materials in finely divided form for the...
TAPPI T830 Ink Rub Test of Containerboard standard by Technical Association of the Pulp and Paper Industry, 03/01/2004 Full Description The Sutherland ink-rub testers are designed to evaluate the scuffing or rubbing resistance of an ink film or fiber surface on...
TAPPI T604 Sulfur Dioxide in Sulfite Cooking Liquor standard by Technical Association of the Pulp and Paper Industry, 01/01/2004 Full Description This method is for the volumetric analysis of sulfite liquors used in the manufacture of sulfite pulp. The method is...
TAPPI T515 Visual Grading and Color Matching of Paper standard by Technical Association of the Pulp and Paper Industry, 01/01/2004 Full Description This method describes the spectral, photometric, and geometric characteristics of a light source, the illuminating and...
TAPPI T 567 Determination of Effective Residual Ink Concentration by Infrared Reflectance Measurement standard by Technical Association of the Pulp and Paper Industry, 01/01/2004 Full Description This method provides a means for determining the Effective Residual Ink...
TAPPI TIP 0410-09 Flow Determination by Chemical Method standard by Technical Association of the Pulp and Paper Industry, 01/01/2004 Full Description In many instances, it is inconvenient to install a weir or other flow measuring device to determine the flow of white...