SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI TIP0404-36 Paper Grade Classifications standard by Technical Association of the Pulp and Paper Industry, 05/25/2004 Full Description Scope:The purpose of this TIP is to identify several commonly used categories for classifying paper grades and to list specific...
TAPPI T574 sp-04 Wax in pulp, paper and paperboard standard by Technical Association of the Pulp and Paper Industry, 05/10/2004 Full Description 1. Scope1.1 This test method measures the amount of petroleum wax in paper, paperboard, and pulp samples under specified...
TAPPI T491 om-04 Water Immersion Number of Paperboard standard by Technical Association of the Pulp and Paper Industry, 05/03/2004 Full Description This test is applicable to paperboards that are medium-sized to hard-sized throughout....
TAPPI T414 om-04 Internal Tearing Resistance of Paper (Elmendorf-Type Method) standard by Technical Association of the Pulp and Paper Industry, 05/03/2004 Full Description This method measures the force perpendicular to the plane of the paper required to tear multiple...
TAPPI T428 om-04 Hot Water Extractable Acidity or Alkalinity of Paper standard by Technical Association of the Pulp and Paper Industry, 05/03/2004 Full Description This method, based on the work of Kohler and Hall (1), measures the titratable acidity or alkalinity (end...
TAPPI T 453 sp-04 Effect of Dry Heat on Properties of Paper and Board standard by Technical Association of the Pulp and Paper Industry, 05/03/2004 Full Description This method specifies the procedure for dry heat treatment of paper or board, and the general procedure for...
TAPPI T 489 om-04 Bending Resistance (Stiffness) of Paper and Paperboard (Taber-Type Stiffness Tester) standard by Technical Association of the Pulp and Paper Industry, 05/03/2004 Full Description This test method covers a procedure used to measure the resistance to...
TAPPI TIP0402-11 Liquid Penetrant Testing of New Suction Roll Shells standard by Technical Association of the Pulp and Paper Industry, 05/01/2004 Full Description This Technical Information Paper (TIP) covers liquid penetrant testing of new suction roll shells produced...
TAPPI T230 Viscosity of Pulp (Capillary Viscometer Method) standard by Technical Association of the Pulp and Paper Industry, 05/01/2004 Full Description This method describes a procedure for determining the viscosity of 0.5% cellulose solutions, using 0.5M...
TAPPI TIP 0808-02 Moisture content of paper: terminology and conversion standard by Technical Association of the Pulp and Paper Industry, 05/01/2004 Full Description This Technical Information Paper covers the terminology typically used when reporting the moisture of...
TAPPI T 274 Laboratory Screening of Pulp (MasterScreen-type Instrument) Screening of Pulp (ille-Type Equ) standard by Technical Association of the Pulp and Paper Industry, 04/01/2004 Full Description A general purpose practice for screening pulp using a specific...
TAPPI T692 Determination of Sed Solids in Kraft Green and White Liquor standard by Technical Association of the Pulp and Paper Industry, 04/01/2004 Full Description This method provides a means of determining the level of suspended solids in kraft green liquor and kraft...