SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI T 263 sp-06 Identification of Wood Fibers From Conifers standard by Technical Association of the Pulp and Paper Industry, 09/13/2006 Full Description This method (1) deals with the identification of wood from conifers and also permits determination of the...
TAPPI T262 sp-06 Preparation of Mechanical Pulps for Testing standard by Technical Association of the Pulp and Paper Industry, 09/13/2006 Full Description This practice describes a procedure for the preparation of mechanical pulps prior to physical testing.It is for use...
TAPPI T 460 om-06 Air Resistance of Paper (Gurley Method) standard by Technical Association of the Pulp and Paper Industry, 09/13/2006 Full Description This method is used to measure the air resistance of approximately 6.4 sq. cm. (l sq. in.) circular area of paper using...
TAPPI T444 om-06 Silver Tarnishing by Paper and Paperboard standard by Technical Association of the Pulp and Paper Industry, 09/13/2006 Full Description This method is for identifying papers and boards that will tarnish or stain silver or other metallic items. The...
TAPPI T438 cm-06 Zinc and Cadmium in Paper standard by Technical Association of the Pulp and Paper Industry, 09/13/2006 Full Description This method maybe used for the determination of cadmium and zinc either in paper or in highly opaque pigments. Zinc is usually present...
TAPPI T 435 om-06 Hydrogen Ion Concentration (pH) of Paper Extracts (Hot Extraction Method) standard by Technical Association of the Pulp and Paper Industry, 09/13/2006 Full Description This method measures the hydrogen ion concentration, expressed in terms of pH, of an...
TAPPI T 413 om-06 Ash in Wood, Pulp, Paper and Paperboard: Combustion at 900 Degrees C standard by Technical Association of the Pulp and Paper Industry, 09/13/2006 Full Description This method for determination of ash can be applied to all types of wood, pulp, paper and...
TAPPI T 412 om-06 Moisture in Pulp, Paper and Paperboard standard by Technical Association of the Pulp and Paper Industry, 09/13/2006 Full Description The following procedure applies to pulp, paper, paperboard, and paper products, except those containing significant...
TAPPI T 400 sp-06 Sampling and accepting a single lot of paper, paperboard, containerboard, or related product standard by Technical Association of the Pulp and Paper Industry, 09/13/2006 Full Description 1.1 This method describes procedures for obtaining a sample for...
TAPPI T 556 om-05 Bending Resistance of Paper and Paperboard (Lorentzen & Wettre-Type Tester) standard by Technical Association of the Pulp and Paper Industry, 09/09/2006 Full Description This procedure is used to measure the bending resistance of paper and...
TAPPI TIP 0404-54 Headbox Approach Piping Guidelines standard by Technical Association of the Pulp and Paper Industry, 07/21/2006 Full Description This Technical Information Paper provides guidelines for design of paper machine headbox approach pipingbetween the machine...
TAPPI TIP 0502-13 Retention Definitions standard by Technical Association of the Pulp and Paper Industry, 07/20/2006 Full Description Define the meanings of the retention terms commonly used in the papermaking process, these being first pass, true, and comprehensive...