SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
IEST RP-CC027.2 Personnel Practices and Procedures in Cleanrooms and Controlled Environments Recommended Practice by Institute of Environmental Sciences and Technology, 04/01/2006 Full Description IEST RP-CC027.2 provides a basis for establishing personnel procedures and...
IES RP-6-15 Sports and Recreational Area Lighting, Includes Errata 1 standard by Illuminating Engineering Society, 03/30/2015 Full Description Over the years, there have been increases in the demand for both indoor and outdoor sports facilities. To meet the increase in...
ISA 60079-5 (12.00.04)-2009 Explosive Atmospheres – Part 5: Equipment Protection by Powder Filling “q” standard by The International Society of Automation, 07/24/2009 Full Description This standard part of IEC 60079 contains specific requirements for the construction,...
IEST RP-CC016.2 The Rate of Deposition of Nonvolatile Residue in Cleanrooms Recommended Practice by Institute of Environmental Sciences and Technology, 04/01/2006 Full Description IEST RP-CC016.2 provides a uniform method and basis for determining the rate of deposition...
IES SEM-11-IM-14 IES Seminar - Light Sources & Auxiliary Devices - Instructor's Manual Training Material by Illuminating Engineering Society, 10/30/2014 Full Description This document is for the Seminar Instructor-Presentor and contains:Background Information...
ISA 60079-6 (12.00.05)-2009 Explosive Atmospheres – Part 6: Equipment Protection by Oil Immersion “o” standard by The International Society of Automation, 07/24/2009 Full Description This standard part of IEC 60079 specifies the requirements for the construction and...
IEST RP-CC019.1 Qualifications for Organizations Engaged in the Testing and Certification of Cleanrooms and Clean-Air Devices Recommended Practice by Institute of Environmental Sciences and Technology, 01/01/2006 Full Description IEST RP-CC019.1 defines recommended...
ISA 60079-15 (12.12.02)-2009 Electrical Apparatus for Use in Class I, Zone 2 Hazardous (Classified) Locations: Type of Protection “n” standard by The International Society of Automation, 07/17/2009 Full Description This standard specifies requirements for the...
IES SEM-11-14 IES Seminar - Light Sources & Auxiliary Devices Training Material by Illuminating Engineering Society, 10/30/2014 Full Description At the end of the seminar, you will be able to: Describe light sources and auxiliary devices using common performance...
IEST RP-CC023.2 Microorganisms in Cleanrooms Recommended Practice by Institute of Environmental Sciences and Technology, 01/01/2006 Full Description IEST RP-CC023.2 provides guidelines for the control and quantitative measurement of viable contamination in the air and on...
ISA 18.2-2009 Management of Alarm Systems for the Process Industries standard by The International Society of Automation, 06/23/2009 Full Description This standard addresses alarm systems for facilities in the process industries to improvesafety, quality, and...
IES LM-71-14 [ Withdrawn ] IES Approved Guide: Photometric Measurement of Tunnel Lighting Installations standard by Illuminating Engineering Society, 10/16/2014 Full Description This LM guide defines adequate and uniform procedures for measuring and...