SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
IES DG-28-15 [ Withdrawn ] Design Guide for Selection, Installation, Operations and Maintenance of Roadway Lighting Control Systems Handbook / Manual / Guide by Illuminating Engineering Society, 07/23/2015 Full Description Electronic outdoor lights are...
ISA TR84.00.06-2009 Safety Fieldbus Design Considerations for Process Industry Sector Applications standard by The International Society of Automation, 10/02/2009 Full Description This technical report:*provides guidance on implementing Safety Fieldbus protocols and...
IES LM-80-15 IES Approved Method: Measuring Luminous Flux and Color Maintenance of LED Packages, Arrays and Modules, Includes Errata 1 standard by Illuminating Engineering Society, 06/26/2015 Full Description LEDs typically exhibit very long operational life...
IEST RP-CC012.2 Considerations in Cleanroom Design Recommended Practice by Institute of Environmental Sciences and Technology, 01/01/2007 Full Description REPLACED 2/1/2015 by IEST RP-CC012.3: Considerations in Cleanroom DesignThis document is no longer being maintained...
ISA 60079-11 (12.02.01)-2009 Explosive Gas Atmospheres - Part 11: Intrinsic Safety 'i' standard by The International Society of Automation, 09/30/2009 Full Description This standard specifies the construction and testing of intrinsically safe apparatus intended...
IES DG-21-15 [ Withdrawn ] Design Guide for Residential Street Lighting Handbook / Manual / Guide by Illuminating Engineering Society, 06/03/2015 Full Description When designing a lighting system for residential streets, there is a wide spectrum of criteria...
IEST RP-CC013.2 Calibration Procedures and Guidelines for Selecting Equipment Used in Testing Cleanrooms and Other Controlled Environments Recommended Practice by Institute of Environmental Sciences and Technology, 10/16/2006 Full Description REPLACED 8/1/2012 by IEST...
IES LM-86-15 Measuring Luminous Flux and Color Maintenance of Remote Phosphor Components standard by Illuminating Engineering Society, 05/27/2015 Full Description This document provides the method for measurement of luminous flux and color maintenance of remotephosphor...
ISA 5.1-2009 Instrumentation Symbols and Identification standard by The International Society of Automation, 09/18/2009 Full Description Establishes a uniform means of designating instruments and instrumentation systems used for measurement and control. The different...
IEST RD-DTE012.2 Handbook for Dynamic Data Acquisition and Analysis Recommended Practice by Institute of Environmental Sciences and Technology, 08/01/2006 Full Description This Reference Document provides guidelines for acquiring and analyzing structural or mechanical...
IES TM-30-15 IES Method for Evaluating Light Source Color Rendition standard by Illuminating Engineering Society, 2015 Full Description This evaluation method is applicable to light sources and lighting systems intended for general illumination of indoor spaces and some...
ISA 60079-18 (12.23.01)-2009 Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Encapsulation “m” standard by The International Society of Automation, 07/31/2009 Full Description This part of IEC 60079 standard gives...