SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
GPA 2186-02 Tentative Method for the Extended Analysis of Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Temperature Programmed Gas Chromatography standard by GPA Midstream Association, 01/01/2002
FCI 15-1-2015 Production Testing of Pressure Regulators standard by Fluid Controls Institute, 2015 Full Description This standard establishes minimum guidelines for production testing of pressure regulators for use by manufacturers, specifiers, inspectors, and users to...
HEI Tech Sheet #107 Frequently Asked or Interesting Vacuum System Questions Data Sheet by Heat Exchange Institute, 07/01/2003
ESD SP3.5-2020 Test Methods for Air Assist Bar Ionizer, Soft X-Ray (Photon) Ionizers, Alternative Room Ionization, and Non-Airflow Alpha Ionizers standard by EOS/ESD Association, Inc., 2020 Full Description ANSI/ESD SP3.5-2020 provides measurement techniques, under...
GPA 2261-00 Analysis for Natural Gas and Similar Gaseous Mixtures by Gas Chromatography standard by GPA Midstream Association, 01/01/2000
FCI 99-2-2015 Pressure Reducing Regulator Capacity standard by Fluid Controls Institute, 2015 Full Description This standard creates a guideline for establishing and reporting regulator capacities for use by manufacturers, users, specifiers and approval bodies in order...
HEI Tech Sheet #106 Specification of Tube Hole Sizes and Tolerances for Support and Baffle Plates Data Sheet by Heat Exchange Institute, 05/07/2003
ESD TR5.5-05-20 Transmission Line Pulse (TLP) - Transient Response Evaluation standard by EOS/ESD Association, Inc., 2020 Full Description The purpose of ESD TR5.5-05-20 is to address two key points: 1) Measurement issues: under what conditions it is possible to perform...
GPA 2100-00 Tentative Method for the Qualitative Determination of Carbonyl Sulfide in Propane standard by GPA Midstream Association, 2000 Full Description This method is intended as a qualitative method to detect carbonyl sulfide in liquid propane at the ppm level. The...
FCI 70-3-2015 Regulator Seat Leakage standard by Fluid Controls Institute, 2015 Full Description Order 70-3 as a set with 70-2 and save!This standard applies to pilot operated and direct acting pressure reducing, pressure relieving (back pressure), differential pressure...
HEI Tech Sheet C-8.1 Closed Feedwater Heater Specification Sheets - English Units and SI Units Data Sheet by Heat Exchange Institute,
ESD TR23.0-01-20 For the Protection of EOS/ESD Susceptible Items - Electrical Overstress in Manufacturing and Test standard by EOS/ESD Association, Inc., 2020 Full Description ESD TR23.0-01-20 covers certain aspects of the control, mitigation, and monitoring of...