SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
FORD WSS-M1H1318-A10 2018 Edition, October 10, 2018 FABRIC, SAGA PATTERN, WARP KNIT, MICROFIBER 100% VIRGIN ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A176-F4 2000 GRAY IRON, BRAKE COMPONENTS, DRUMS AND ROTORS, HIGH PERFORMANCE APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A176-F5 2000 GRAY IRON, BRAKE COMPONENTS, DRUMS AND ROTORS, IMPROVED DAMPING PROPERTIES AND MINIMUM CARBON EQUIVALENT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A176-E2 2000 GRAY IRON, BRAKE COMPONENTS, DRUMS AND ROTORS, IMPROVED DAMPING PROPERTIES ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1A176-E3 2000 GRAY IRON, BRAKE COMPONENTS, DRUMS AND ROTORS, IMPROVED TEMPERATURE PROPERTIES ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WRS-M4D939-A2 2018 Edition, October 11, 2018 POLYPROPYLENE (PP) HOMOPOLYMER, 33% TALC FILLED, MOLDING COMPOUND, 37% PCR/PIR RESIN CONTENT, 25% RECYCLED MATERIAL BY WEIGHT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H151-A3 2000 CARPET, BCF NYLON 6/6, CUT PILE, PRINCETON PATTERN, 390 g/m2 (11.5 oz), POLYETHYLENE BACKING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M21P27-A1 2018 Edition, October 12, 2018 SUBSEQUENT TREATMENTS FOR FASTENER SURFACE FINISHES ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M21P27-A4 2000 SUBSEQUENT TREATMENTS FOR FASTENER SURFACE FINISHES ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3H214-A1 2018 Edition, October 25, 2018 CARPET, 214 PATTERN, BCF NYLON 6, CUT PILE, 509 g/m2 (15 oz) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M9H145-A10 2018 Edition, November 2, 2018 FABRIC, ADAGIO PATTERN, FLAT WOVEN, 100% VIRGIN, 0% LIGHT TRANSMITTANCE CURTAIN ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WQ130A 2018 Edition, November 6, 2018 MATERIAL AND PERFORMANCE REQUIREMENTS OF POLYAMIDE (PA) HEAT STABILIZED, GLASS-FILLED MOLDING COMPOUND FOR FASTENER USE