SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
AWWA C500-19 Metal-Seated Gate Valves for Water Supply Service standard by American Water Works Association, 06/01/2019 Full Description This standard describes iron-body, metal-to-metal seated, nonrisingstem (NRS) gate valves, including tapping gate valves, 3 in. (75...
AWWA F101-19 Contact-Molded, Fiberglass-Reinforced Plastic Wash-Water Troughs and Launders standard by American Water Works Association, 06/01/2019 Full Description This standard describes the minimum requirements for fiberglass-reinforced plastic wash-water troughs and...
AWWA F102-19 Matched-Die Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets standard by American Water Works Association, 05/01/2019 Full Description This standard describes the minimum requirements for fiberglass-reinforced plastic...
AWWA C520-19 Knife Gate Valves, Sizes 2 In. (50 mm) Through 96 In. (2,400 mm) standard by American Water Works Association, 05/01/2019 Full Description This standard describes fabricated steel and stainless-steel tapping sleeves used to provide outlets and branches on...
AWWA B304-18 Liquid Oxygen for Ozone Generation for Water, Wastewater, and Reclaimed Water Systems standard by American Water Works Association, 03/01/2019 Full Description The purpose of this standard is to provide the minimum requirements for LOX intended for water,...
AWWA C521-18 Plastic Ball Valves standard by American Water Works Association, 01/01/2019 Full Description The purpose of this standard is to define the minimum requirements for water supply service plastic ball valves, including materials, design, testing, and...
AWWA G400-18 Utility Management System standard by American Water Works Association, 08/01/2018 Full Description This standard covers the essential requirements for an effective utility management system.This standard can be referenced to provide water or wastewater...
AWWA C205-18 Cement-Mortar Protective Lining and Coating for Steel Water Pipe, 4 In. (100 mm) and Larger, Shop Applied standard by American Water Works Association, 04/01/2018 Full Description The purpose of this standard is to provide the minimum requirements for...
AWWA M19 M19: Emergency Planning for Water Utilities Handbook / Manual / Guide by American Water Works Association, 2018 Full Description Water and wastewater utilities must be prepared for any type of emergency. Public health must be protected and service must be...
AWWA C550-17 Protective Interior Coatings for Valves and Hydrants standard by American Water Works Association, 08/01/2017 Full Description This standard describes protective interior coatings for valves used for water supply, wastewater collection and treatment, and...
AWWA B511-17 Potassium Hydroxide standard by American Water Works Association, 07/01/2017 Full Description This standard covers potassium hydroxide (KOH), dry and liquid, for water supply service application.The purpose of this standard is to provide the minimum...
AWWA M58 M58: Internal Corrosion Control in Water Distribution Systems Handbook / Manual / Guide by American Water Works Association, 2017 Full Description Internal pipe corrosion in the water distribution system is a significant concern and can cause problems with water...