SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
AWWA JAW3715 Journal AWWA - Feasibility Studies on Liquid Ion Exchange for Alum Recovery From Water Treatment Plant Sludges Journal Article by American Water Works Association, 01/01/1980 Cornwell, David A.;Lemunyon, Roger M. Full Description A specific...
AWWA M22 Sizing Water Service Lines and Meters Handbook / Manual / Guide by American Water Works Association, 01/01/1975 Full Description This technical design manual can help engineers, architects, designers, technicians accurately size a planned water distribution...
AWWA 20444 Water Resources Conference: 1999 Proceedings Conference Proceeding by American Water Works Association, Full Description This one proceedings CD-ROM gives you fast access to all the papers presented at the 1999 Water Resources conference....
AWWA JTMGT57479 Fair Impact Fees for Large Non-Residential Users Conference Proceeding by American Water Works Association, Wegley, Lynne; Gallagher, John Full Description The City of Longmont, Colorado charges water and wastewater system development...
AWWA C563-21 Fabricated Composite Slide Gates standard by American Water Works Association, 01/01/2022 Full Description The purpose of this standard is to provide the minimum requirements for fabricated composite slide gates, including materials, general design,...
AWWA C906-21 Polyethylene (PE) Pressure Pipe and Fittings, 4 In. thru 65 In. (100 mm Through 1650 mm), for Waterworks standard by American Water Works Association, 12/01/2021 Full Description This standard describes polyethylene (PE) pressure pipe and fittings made from...
AWWA D100-21 Welded Steel Tanks for Water Storage standard by American Water Works Association, 12/01/2021 Full Description The purpose of this standard is to provide guidance to facilitate the design, manufacture, and procurement of welded carbon steel tanks for the...
AWWA G200-21 Distribution Systems Operation and Management standard by American Water Works Association, 11/01/2021 Full Description This standard describes critical requirements for the operation and management of potable water distribution systems, including...
AWWA C516-21 Large-Diameter Rubber-Sealed Butterfly Valves, 78 in (2000mm) and Larger standard by American Water Works Association, 07/01/2021 Full Description The purpose of this standard is to provide the minimum requirements for large-diameter flanged rubber-seated...
AWWA G480-20 Water Conservation and Efficiency Program Operation and Management standard by American Water Works Association, 02/01/2021 Full Description The purpose of this standard is to establish criteria for the establishment of a formal utility water conservation...
AWWA C115/A21.15-20 Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges standard by American Water Works Association, 08/01/2020 Full Description The purpose of this standard is to provide the minimum requirements for flanged ductile-iron pipe with...
AWWA B406-20 Ferric Sulfate standard by American Water Works Association, 08/01/2020 Full Description The purpose of this standard is to provide minimum requirements for ferric sulfate, including physical, chemical, sampling, packaging, shipping, and testing...