SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
AWWA C214-20 Machine-Applied Polyolefin Tape Coatings for Steel Water Pipe standard by American Water Works Association, 04/01/2021 Full Description The purpose of this standard is to provide the minimum performance requirements for tape coating systems for the exterior...
AWWA C901-20 Polyethylene (PE) Pressure Pipe and Tubing, 3/4 In. (19 mm) Through 3 In. (76 mm), for Water Service standard by American Water Works Association, 02/01/2021 Full Description The purpose of this standard is to provide the requirements for materials, testing,...
AWWA C670-20 Online Chlorine Analyzer Operation and Maintenance standard by American Water Works Association, 02/01/2021 Full Description This standard describes the operation and maintenance of online chlorine analyzers used in the treatment and monitoring of potable...
AWWA C515-20 Reduced-Wall, Resilient-Seated Gate Valves for Water Supply Service standard by American Water Works Association, 02/01/2021 Full Description This standard covers reduced wall, resilient-seated gate valves with nonrising stems and outside screw-and-yoke...
AWWA M71 Climate Action Plans - Adaptive Management Strategies for Utilities Handbook / Manual / Guide by American Water Works Association, 2021 Full Description The purpose of M71 Climate Action Plans is to provide a starting point for utility managers and planners...
AWWA M64 Gas Transfer Applications in Water: Addition and Removal Handbook / Manual / Guide by American Water Works Association, 2021 Full Description The contents of this Manual include the importance of gas transfer operations in water treatment, including a definition...
AWWA M72 Draft Knife Gate Valves Handbook / Manual / Guide by American Water Works Association, 01/01/2021
AWWA C700-20 Cold-Water Meters - Displacement Type, Metal Alloy Main Case standard by American Water Works Association, 11/01/2020 Full Description The purpose of this standard is to provide the minimum requirements for cold-water metersdisplacement type, metal alloy...
AWWA C710-20 Cold-Water Meters-Displacement Type, Plastic Main Case standard by American Water Works Association, 11/01/2020 Full Description The purpose of this standard is to provide the minimum requirements for cold-water metersdisplacement type, plastic main case,...
AWWA C950-20 Fiberglass Pressure Pipe standard by American Water Works Association, 09/01/2020 Full Description The purpose of this standard is to provide the minimum requirements for fiberglass pressure pipe, including design, fabrication, and testing requirements. This...
AWWA A100-20 Water Wells standard by American Water Works Association, 07/01/2020 Full Description The purpose of this standard is to provide the minimum requirements for water wells, including consideration of the influences of geologic and hydrologic conditions and...
AWWA C703-19 Cold-Water Meters - Fire-Service Type standard by American Water Works Association, 05/01/2020 Full Description The purpose of this standard is to provide the minimum requirements for cold-water metersfire-service type. This standard can be referenced in...