SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
AWWA C200-12 Errata Errata to Steel Water Pipe - 6 in. (150 mm) and Larger Amendment by American Water Works Association, Full Description This standard describes electrically butt-welded straight-seam or spiral-seam pipe and seamless pipe, 6 in. (150 mm)* in nominal...
AWWA C104/A21.4-08 Erratum 2010 Erratum to ANSI/AWWA C104/A21.4-08 Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings Amendment by American Water Works Association,
AWWA C222-99 Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe Fittings standard by American Water Works Association, Full Description The purpose of this standard is to provide the minimum requirements for polyurethane lining and coating systems...
AWWA C561-21 Fabricated Stainless Steel Slide Gates standard by American Water Works Association, 01/01/2022 Full Description The purpose of this standard is to provide the minimum requirements for fabricated stainless-steel slide gates, including materials, general...
AWWA C800-21 Underground Service Line Valves and Fittings standard by American Water Works Association, 10/01/2021 Full Description This standard covers valves, fittings, service saddles, and meter setters for use in a service line from the main through the meter valve...
AWWA C671-21 OnlineTurbidimeter Operation and Maintenance standard by American Water Works Association, 08/01/2021 Full Description The purpose of this standard is to provide the minimum requirements for operation and maintenance of online turbidimeters. This standard...
AWWA B304-21 Liquid Oxygen for Ozone Generation for Water, Wastewater, and Reclaimed Water Systems standard by American Water Works Association, 07/01/2021 Full Description The purpose of this standard is to provide the minimum requirements for LOX intended for the...
AWWA D102-21 Coating Steel Water-Storage Tanks standard by American Water Works Association, 06/01/2021 Full Description The purpose of this standard is to provide the minimum requirements for coating steel water-storage tanks, including materials, coating systems,...
AWWA C605-21 Underground Installation of Polyvinyl Chloride (PVC) and Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe and Fittings standard by American Water Works Association, 05/01/2021 Full Description This standard describes underground installation and...
AWWA J100-21 Risk and Resilience Management of Water and Wastewater Systems standard by American Water Works Association, 05/01/2021 Full Description This standard is an American National Standard, as designated by the American National Standards Institute, and falls...
AWWA G485-20 Potable Reuse Program Operation and Management standard by American Water Works Association, 04/01/2021 Full Description The purpose of this standard is to define the critical requirements for the effective operation and management of a potable reuse water...
AWWA C514-20 Air Valve and Vent Inflow Preventer Assemblies for Potable Water Distribution System and Storage Facilities standard by American Water Works Association, 04/01/2021 Full Description The purpose of this standard is to provide the minimum requirements for...