UL 103
Factory-Built Chimneys for Residential Type and Building Heating Appliances
standard by Underwriters Laboratories, 08/23/2001
Full Description
Factory-Built Chimneys for Residential Type and Building Heating Appliances
UL 103
Scope
1.1 These requirements cover factory-built chimneys intended for venting gas, liquid, and solid-fuel fired residential-type appliances and building heating appliances in which the maximum continuous flue-gas outlet temperatures do not exceed 1000F (538C). Factory-built chimneys are intended for installation in accordance with the Standard for Chimneys, Fireplaces, Vents, and Solid-Fuel Burning Appliances, NFPA 211, and in accordance with codes such as the BOCA National Mechanical Code, the Standard Mechanical Code, and the Uniform Mechanical Code. They are intended for installation inside or outside of buildings or both, in a manner that provides a vertical (30 degree maximum offset) conduit or passageway to transport flue gases to the outside.
1.2 The chimneys covered by these requirements comply with either a 1700F (927C) flue-gas temperature test or a 2100F (1149C) flue-gas temperature test, at the manufacturer's option.