M00006342
New product
GMW14317 3rd Edition, November 2015 Retractor/Escutcheon – Webbing Abrasion
In stock
Warning: Last items in stock!
Availability date: 03/08/2022
Description / Abstract:
GMW14317, 3rd Edition, November 2015 - Retractor/Escutcheon – Webbing Abrasion
Introduction
Note: Nothing in this
standard supercedes applicable laws and regulations.
Note: In the event of
conflict between the English and domestic language, the English
language shall take precedence.
Purpose. To determine
the strength of the safety belt webbing after exposure to abrasion
from the webbing cycling across the retractor opening, escutcheon,
intermediate guide, and guideloop.
Applicability. To all
safety belt assemblies with webbing that may come in contact with
the retractor opening, escutcheon, intermediate guide, or
guideloop. Note that if the direction of retraction/extraction of
the webbing is controlled by an intermediate guide or guideloop,
and the webbing cannot contact the retractor opening or escutcheon,
the test for the retractor opening and escutcheon does not
apply.
Remarks. The extraction
or retraction of the safety belt webbing across the retractor
opening, escutcheon, intermediate guide, or guideloop may cause the
belt to become abraded. The intent of this test is to cycle the
webbing across the retractor opening, escutcheon, intermediate
guide, or guideloop and then measure the strength of the abraded
webbing.