GMW14676

Description / Abstract: GMW14676, 3rd Edition, July 2017 - Compression Properties of Metal Center Tubes and Contact Surfaces of Metal Parts with Bolt Through Holes

Introduction

Note: Nothing in this standard supercedes applicable laws and regulations.

Note: In the event of conflict between the English and domestic language, the English language shall take precedence.

Purpose. This test procedure shall be used to determine the compression properties of metal center tubes and contact surfaces of metal parts with bolt through holes.

Definition. The compression properties of metal center tubes and contact surfaces of metal parts with bolt through holes as determined by this test procedure shall be defined as the permanent length change of a part mentioned previously, when subjected to an axial pressure applied at a fixed velocity. T

he compression properties can be expressed by a force-displacement hysteresis curve.

Applicability. Unless otherwise specified, this procedure applies to the initial tightening event of joints using new (unused) parts for each joint.