CAN/CSA Z245.1-98 Steel Line Pipe

standard by Canadian Standards Association / National Standard of Canada, 02/16/2000

Full Description

This is a searchable PDF.

It includes GI #2.

1. Scope

1.1

General This Standard covers seamless, continuous welded, electric welded (flash welded pipe and low frequency electric welded pipe excluded), and submerged arc welded pipe primarily intended for use in oil or gas pipeline systems. Notes: (1) Flash welded pipe is pipe manufactured by a process combining electric resistance heating to produce a simultaneous coalescence over the entire area of the abutting edges and the application of pressure for joining. (2) Low frequency is less than 1 kHz.

1.2

Size, Grade, and Category Note: It is not intended that pipe be available in all combinations of size, grade, category, and manufacturing process. The individual pipe manufacturers should be consulted to ascertain the availability of specific pipe items.

1.2.1

Outside Diameter and Wall Thickness This Standard covers pipe having specified outside diameters f rom 10.3 mm to 2032 mm inclusive. The standard outside diameters and wall thicknesses are as given in Table 9.1.

1.2.2

Grade This Standard covers pipe from Grade 172 to Grade 550 inclusive. The standard grades are as given in Table 8.1.

1.2.3

Category This Standard covers pipe in the following categories: (a) Category I - Pipe without requirements for proven pipe body notch toughness; (b) Category II - Pipe with requirements for proven pipe body notch toughness in the form of energy absorption and fracture appearance; and (c) Category III - Pipe with requirements for proven pipe body notch toughness in the form of energy absorption.

Product Details

Published: 02/16/2000 Number of Pages: 6 File Size: 1 file , 1.1 MB