CAN/CSA C22.2 NO. 42.1-00 (R2009)
Cover Plates for Flush-Mounted Wiring Devices (Bi-national standard, with UL 514D), Includes General Instruction No. 1 (2000), Update No. 2 (2001), Update No. 3 (2002), Update No. 4 (2003), Update No. 5 (2007), Update No. 6 (2011)
standard by Canadian Standards Association / National Standard of Canada, 04/01/2000
Full Description
This PDF includes GI 2.
1. Scope
1.1
This Standard applies to metallic and nonmetallic cover plates and associated gaskets for flush-mounted wiring devices intended for installation in accordance with the National Electrical Code, NFPA 70, and the Canadian Electrical Code (CEC), Part 1 .
1.2
This Standard also applies to outlet box hoods that are either integral or not integral with a cover plate for flush-mounted wiring devices.
1.3
This Standard also applies to cover plates for flush-mounted wiring devices intended for use in marine applications in accordance with the applicable requirements of the United States Coast Guard and the Canadian Coast Guard; IEEE Recommended Practice for Electrical Installation on Shipboard, IEEE Standard 45; the American Boat and Yacht Council; and the Standard for Pleasure and Commercial Motor Craft, NFPA 302.
1.4
This Standard does not apply to: (a) telephone wall plates; or (b) cover plates and associated gaskets intended for use in hazardous (classified) locations as defined in the National Electrical Code (NEC), NFPA 70, and the Canadian Electrical Code (CEC), Part I.