M00051564
New product
CSA C22.2 NO. 0.12-M1985 (R2016) Wiring Space and Wire Bending Space in Enclosures for Equipment Rated 750 V or Less
standard by CSA Group, 02/24/2000
In stock
Warning: Last items in stock!
Availability date: 01/10/2022
Electrical Installation Please Note:
Refers to a formally approved revision dated July 1985.
Copyright © Canadian Standards Association — 1985 All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior permission of the publisher.
Contents
General
Wiring Space (See Appendix A.)
Wire Bending Space at Field Wiring Terminals Including the Neutral (See Appendix A.)
Wire Bending Space at Other Than Field Terminals
Canadian Standards Association, Rexdale, Ontario
Chairman
Canadian Standards Association, Rexdale, Ontario
Standards Administrator, Nonvoting
D. Bennicke
Nova Scotia Department of Labour and Manpower, Halifax
Newfoundland Department of Labour and Manpower, St. John's
Manitoba Hydro, Winnipeg
Ontario Hydro, Toronto
British Columbia Ministry of Labour, Vancouver
Ministère de l'Habitation et de la Protection du consommateur, Montréal, Québec
Alberta Labour, Edmonton
Motorola Canada Limited, Willowdale, Ontario
Canadian General Electric Company Limited, Toronto, Ontario
Allen-Bradley Canada Ltd., Cambridge, Ontario
Alcan Canada Products, Limited, Toronto, Ontario
Canada Wire and Cable Limited, Don Mills, Ontario
Westinghouse Canada Inc., Hamilton, Ontario
City of Vancouver, British Columbia
Representing CE Code, Part I
Canadian Electrical Association, Montreal, Quebec
Representing Canadian Electrical Association
Toronto, Ontario
Canadian Standards Association, Rexdale, Ontario
Alternate
Canadian Standards Association, Rexdale, Ontario
Department of Consumer and Corporate Affairs,
Hull, Quebec
Representing Federal Department of Consumer and Corporate Affairs
Alberta Workers Health, Safety and Compensation, Edmonton
National Research Council, Ottawa, Ontario
Representing National Research Council
Department of Regional Industrial Expansion,
Ottawa, Ontario
Public Works Canada, Ottawa, Ontario
British Standards Institution, Hemel Hempstead, Hertfordshire, England
Health and Welfare Canada, Ottawa, Ontario
National Electrical Manufacturers Association,
Washington, D.C., USA
Underwriter's Laboratories of Canada, Scarborough, Ontario
Standards Council of Canada, Mississauga, Ontario
Canadian Gas Association, Don Mills, Ontario
Allen-Bradley Canada Ltd., Cambridge, Ontario
Canadian Standards Association, Rexdale, Ontario
Commander Electrical Equipment, Inc., Scarborough, Ontario
Ministère de l'Habitation et de la Protection du Consommateur, Montréal, Québec
Polygon Industries Ltd., Toronto, Ontario
Federal Pioneer Limited, Bramalea, Ontario
Canadian Standards Association, Rexdale, Ontario
Standards Administrator
This is the first edition of No. 0.12 of a series of Standards issued by Canadian Standards Association under Part II of the Canadian Electrical Code.
It is contemplated that Subcommittees responsible for other standards forming Part II of the Canadian Electrical Code may recommend for them detailed requirements, which, although differing from those herein, are judged to achieve the same objective.
For general information on the Standards of the Canadian Electrical Code, Part II, see the Preface of CSA Standard C22.2 No. 0, General Requirements—Canadian Electrical Code, Part II.
This Standard was prepared by a Subcommittee under the jurisdiction of the Standards Steering Committee on CE Code, Part II and was formally approved by this Committee.
May, 1985
Note: Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the user of the Standard to judge its suitability for his or her particular purpose.
CSA Standards are subject to periodical review and suggestions for their improvement will be referred to the appropriate committee. All enquiries regarding this Standard, including requests for interpretation, should be addressed to Canadian Standards Association, Standards Division, 178 Rexdale Boulevard, Rexdale (Toronto), Ontario M9W 1R3. Requests for interpretation should
define the problem, making reference to a specific Clause, and, where appropriate, include an illustrative sketch;
provide an explanation of circumstances surrounding the actual field condition; and
be phrased, where possible, to permit a specific "yes" or "no" answer.
Interpretations are published in "CSA Information Update". For subscription details and a free sample copy, write to CSA Business Development Group or telephone (416) 747-4019.
Canadian Standards Association provides certification services for manufacturers who, under license from CSA, wish to use the appropriate registered CSA Marks on certain products of their manufacture to indicate conformity with CSA Standards.
CSA Certification for a number of products is provided in the interest of maintaining agreed-upon standards of quality, performance, interchangeability and/or safety, as appropriate. Where applicable, certification may form the basis for acceptance by inspection authorities responsible for enforcement of regulations. Where feasible, programs will be developed for additional products for which certification is desired by producers, consumers or other interests.
In performing its functions in accordance with its objectives, CSA does not assume or undertake to discharge any responsibility of the manufacturer or any other party. The opinions and findings of the Association represent its professional judgement given with due consideration to the necessary limitations of practical operation and state of the art at the time the Standard is processed.
Products in substantial accord with this Standard but which exhibit a minor difference or a new feature may be deemed to meet the Standard providing the feature or difference is found acceptable utilizing appropriate CSA Certification Division Operating Procedures. Products which comply with this Standard shall not be certified if they are found to have additional features which are inconsistent with the intent of this Standard. Products shall not be certifiable if they are discovered to contravene applicable Federal laws or regulations.
Testing techniques, test procedures and instrumentation frequently must be prescribed by the CSA Certification Division in addition to the technical requirements contained in Standards of CSA. In addition to markings specified in the Standard the CSA Certification and Testing Division may require special cautions, markings and instructions that are not specified by the Standard.
Some tests required by CSA Standards may be inherently hazardous. The Association neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed, whether performed in whole or in part by the manufacturer or the Association, and whether or not any equipment, facility or personnel for or in connection with the test is furnished by the manufacturer or the Association.
Manufacturers should note that, in the event of the failure of the CSA Certification and Testing Division to resolve an issue arising from the interpretation of requirements, there is an appeal procedure: the complainant should submit the matter, in writing, to the Secretary of the Canadian Standards Association.
If this Standard is to be used in obtaining CSA Certification please remember, when making application for certification, to request all current Amendments, Bulletins, Notices and Technical Information Letters that may be applicable and for which there may be a nominal charge. For such information or for further information concerning details about CSA Certification please address your inquiry to the Applications and Records Section, Canadian Standards Association, 178 Rexdale Boulevard, Rexdale (Toronto), Ontario M9W 1R3.
This Standard applies to enclosed equipment that is to be permanently field connected to line or load circuits rated 750 V or less.
Minimum wiring space and wire bending space requirements are specified for field installed wires terminating in or passing through enclosures or terminal boxes.
The requirements are considered to be the minima that would permit field wiring without damage to the wires.
This Standard shall form a part of and be read in conjunction with all individual standards to which the requirements of this Standard may apply, except that, where an individual standard contains requirements that are at variance with those of this Standard, the requirements of the individual standard shall take precedence.
This Standard does not apply to enclosures of equipment intended to be wired with conductors that are smaller than No. 14 AWG.
The following definitions apply in this Standard:
There shall be adequate space within an enclosure for the installation and termination of all wires intended to be employed.
Wiring and wire bending spaces shall be smooth and free from sharp edges, burrs, or other sources of mechanical damage, which could damage wire insulation.
A wiring space shall have, clear of all obstructions, a cross sectional area of not less than 250% of the total cross sectional area of the maximum number of wires intended to be installed in it, and the minimum width or depth shall be not less than shown in Table 1.
Except as permitted in Clause 3.3.2, wire bending space shall, for the maximum size and number of wire(s) intended, be not less than
as shown in Table 2; or
as shown in Table 3 if the wire connectors can be readily removed to facilitate making connections.