M00051534
New product
CSA C22.2 NO. 320:19 Controlled outlets
standard by CSA Group, 04/01/2019
In stock
Warning: Last items in stock!
Availability date: 01/10/2022
National Standard of Canada
Canadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.
Disclaimer and exclusion of liability
This document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this document’s fitness for a particular purpose or use, its merchantability, or its non-infringement of any third party’s intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this document’s compliance with any applicable statute, rule, or regulation.
IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.
In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.
CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.
Intellectual property rights and ownership
As between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Group’s and/or others’ intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.
Patent rights
Attention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.
Authorized use of this document
This document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:
If this document is in electronic form:
load this document onto a computer for the sole purpose of reviewing it;
search and browse this document; and
print this document if it is in PDF format.
Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each such copy.
In addition, users may not and may not permit others to
alter this document in any way or remove this Legal Notice from the attached standard;
sell this document without authorization from CSA Group; or
make an electronic copy of this document.
If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.
CSA C22.2 No. 320:19
April 2019
Title: Controlled outlets
To register for e-mail notification about any updates to this publication
go to store.csagroup.org
click on CSA Update Service
The List ID that you will need to register for updates to this publication is 2426623.
If you require assistance, please e-mail techsupport@csagroup.org or call 416-747-2233.
Visit CSA Group’s policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.
Canadian Standards Association (operating as “CSA Group”), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for- profit, nonstatutory, voluntary membership association engaged in standards development and certification activities.
CSA Group standards reflect a national consensus of producers and users — including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment.
Individuals, companies, and associations across Canada indicate their support for CSA Group’s standards development by
volunteering their time and skills to Committee work and supporting CSA Group’s objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSA Group’s total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSA Group’s standards development activities.
CSA Group offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, CSA Group regularly and continually audits and inspects products that bear the
CSA Group Mark.
In addition to its head office and laboratory complex in Toronto, CSA Group has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, CSA Group has developed the necessary expertise to meet its corporate mission: CSA Group is an independent service
organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.
For further information on CSA Group services, write to CSA Group
178 Rexdale Boulevard Toronto, Ontario, M9W 1R3 Canada
A National Standard of Canada is a standard developed by a Standards Council of Canada (SCC) accredited Standards Development Organization, in compliance with requirements and guidance set out by SCC. More information on National Standards of Canada can be found at www.scc.ca.
SCC is a Crown corporation within the portfolio of Innovation, Science and Economic Development (ISED) Canada. With the goal of enhancing Canada's economic competitiveness and social well- being, SCC leads and facilitates the development and use of national and international standards. SCC also coordinates Canadian participation in standards development, and identifies strategies to advance Canadian standardization efforts.
Accreditation services are provided by SCC to various customers, including product certifiers, testing laboratories, and standards development organizations. A list of SCC programs and accredited bodies is publicly available at www.scc.ca.
Standards Council of Canada 600-55 Metcalfe Street Ottawa, Ontario, K1P 6L5 Canada
Cette Norme Nationale du Canada n’est disponible qu’en anglais.
Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users to judge its suitability for their particular purpose.
®A trademark of the Canadian Standards Association, operating as “CSA Group”
National Standard of Canada
CSA C22.2 No. 320:19
®A trademark of the Canadian Standards Association, operating as “CSA Group”
Published in April 2019 by CSA Group
A not-for-profit private sector organization
178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3
To purchase standards and related publications, visit our Online Store at store.csagroup.org
or call toll-free 1-800-463-6727 or 416-747-4044.
ICS 29.120.20
ISBN 978-1-4883-1748-4
© 2019 Canadian Standards Association
All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.
Technical Committee on Wiring Products 3 Integrated Committee on Wiring Devices 5 Preface 8
Scope 9
Reference publications 10
Definition 11
General 11
Components 11
General requirements 12
Construction 12
Recognized configurations and interchangeability 12
Enclosures 13
Bushings and strain relief 13
Receptacles 14
Mounting means 14
Terminals and leads 14
Sealing 15
Terminal parts 16
Current-carrying parts 17
General 17
Live parts 17
Terminals and Leads 17
Separable terminal assembly 21
Insulating material 21
Spacings 22
Components 23
Surge protective devices 23
Switches 23
Capacitors 23
Surge protection (type 3) 23
Transformers 23
Resistors 24
Outlet devices and attachment plug terminals 24
6 Tests | 26 | |
6.1 | General 26 | |
6.2 | Component breakdown test | 26 |
6.2.1 | Effects on equipment 26 | |
6.2.2 | Effects on controlled load | 26 |
6.2.3 | Component evaluation 27 |
Limited short-circuit test 27
Mold stress-relief distortion test 27
Leakage current test for controlled outlets 28
Leakage current test 28
Grounding and bonding conductor test 29
Printed circuit board coatings 29
General 29
Dielectric strength test on new specimen 29
Dielectric strength test after aging 29
Dielectric strength test after humidity conditioning 30
Adhesion 30
Moisture absorption resistance of insulating barriers, fibre liners, or similar materials 30
Marking 30
General 30
Marking of controlled outlets 32
Controlled outlets intended for use with copper wire only 32
Controlled outlets intended for use with copper or aluminum conductors 33
Marking of hospital-grade controlled outlets 33
Marking of tamper-resistant devices 34
Marking of weather-resistant devices 34
Installation instructions 34
P. Desilets Leviton Manufacturing of Canada Limited, Pointe-Claire, Quebec, Canada
Category: Producer Interest
Chair
T. Simmons British Columbia Institute of Technology, Burnaby, British Columbia, Canada Category: General Interest
Vice-Chair
W.J. Burr Burr and Associates,
Campbell River, British Columbia, Canada
Category: User Interest
Davis Electro Cables Incorporated, Trenton, Ontario, Canada Category: Producer Interest
S.W. Douglas International Association of Electrical Inspectors,
Toronto, Ontario, Canada
Category: General Interest
Drysdale Nexans Canada Inc., Fergus, Ontario, Canada
Category: Producer Interest
R.W. Horner Atkore International (Allied Tube & Conduit Corporation),
Harvey, Illinois, USA
Category: Producer Interest
J. Imlah Imlah Electrical Consulting, Aloha, Oregon, USA Category: User Interest
R.J. Kelly Government of Nunavut-Dept of Community & Government Services,
Iqaluit, Nunavut, Canada
Category: Regulatory Authority
S.H. Mallikarachchi City of Winnipeg Planning, Property & Development,
Winnipeg, Manitoba, Canada
Category: Regulatory Authority
Mercier Régie du bâtiment du Québec, Montréal, Quebec, Canada Category: Regulatory Authority
Olechna Electrical Safety Authority, Mississauga, Ontario, Canada Category: Regulatory Authority
K.L. Rodel Hubbell Canada ULC, Pickering, Ontario, Canada Category: Producer Interest
A.Z. Tsisserev AES Engineering,
Vancouver, British Columbia, Canada
Category: General Interest
J. Turner Swansea Consulting, Toronto, Ontario, Canada Category: User Interest
L. Letea CSA Group,
Toronto, Ontario
Project Manager
K.L. Rodel Hubbell Canada ULC, Pickering, Ontario
Chair
A.F. Aljabri Siemens Canada Limited, Brampton, Ontario
B. Arguirova Morrison Hershfield Limited, Burnaby, British Columbia
N. Baird EGS Electrical Group Canada Ltd., Elmira, Ontario
G. Benjamin Thomas & Betts Limited, Dorval, Québec
D.M. Berlin Intermatic Incorporated, Spring Grove, Illinois, USA
D. Carson All Fired Up! Ltd., Milton, Ontario
P. Desilets Leviton Manufacturing of Canada Limited, Pointe-Claire, Québec
J.S. Frederic Underwriters Laboratories Inc., Melville, New York, USA
T. George Omron Management Center of America, Hoffman Estates, Illinois, USA
J.A. Gibson TriVar Inc., Brampton, Ontario
T. Hamden CSA Group, Toronto, Ontario
R. Haring Philips Lighting North America Corporation, Rosemont, Illinois, USA
W. Hartill 2D2C, Inc., Kitchener, Ontario
R. Hopkins Infrastructure Health and Safety Association, Mississauga, Ontario
T. Hum Leviton Manufacturing of Canada Limited, Pointe-Claire, Québec
T. Jackson Wieland Electric, Lewiston, Maine, USA
B. Keane Eaton,
Mississauga, Ontario
D.H. Kendall Thomas & Betts Corporation, Memphis, Tennessee, USA
D.J. Kissane Pass & Seymour Inc., Syracuse, New York, USA
T. Kranendonk Brantford, Ontario
C.S. Kurten Underwriters Laboratories Inc., Melville, New York, USA
J. Louie General Electric Company, Cleveland, Ohio, USA
D.L. Lutz Hubbell Incorporated Wiring Device Division, Shelton, Connecticut, USA
F. Magisano Hubbell Canada ULC, Pickering, Ontario
A. Marrero Euroloft Inc., Woodbridge, Ontario
E. Mendoza Philips Lighting North America Corporation, Rosemont, Illinois, USA
S. Mermillod IPEX Management Inc., Verdun, Québec
A. Mokrytskiy Southwire Co., Carrollton, Georgia, USA
W. Molto MM Plastic (Mfg.) Company Inc., Mississauga, Ontario
J. Perry Brampton, Ontario
S. Scott North American Pipe Corporation, a Westlake Chemical Company,
Woodbridge, Ontario
R. Spehalski Lutron Electronics Company Inc., Coopersburg, Pennsylvania, USA
L. Letea CSA Group,
Toronto, Ontario
Project Manager
This is the first edition of CSA C22.2 No. 320, Controlled outlets. It is one of a series of Standards issued under Part II of the Canadian Electrical Code.
For general information on the Standards of the Canadian Electrical Code, Part II, see the Preface of the latest edition of CAN/CSA-C22.2 No. 0.
This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard.
This Standard was prepared by the Integrated Committee on Wiring Devices, under the jurisdiction of the Technical Committee on Wiring Products and the Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the Technical Committee.
Interpretations: The Strategic Steering Committee on Requirements for Electrical Safety has provided the following direction for the interpretation of standards under its jurisdiction: “The literal text shall be used in judging compliance of products with the safety requirements of this Standard. When the literal text cannot be applied to the product, such as for new materials or construction, and when a relevant committee interpretation has not already been published, CSA’s procedures for interpretation shall be followed to determine the intended safety principle.”
This standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Notes:
Use of the singular does not exclude the plural (and vice versa) when the sense allows.
Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose.
This Standard was developed by consensus, which is defined by CSA Policy governing standardization — Code of good practice for standardization as “substantial agreement. Consensus implies much more than a simple majority, but not necessarily unanimity”. It is consistent with this definition that a member may be included in the Technical Committee list and yet not be in full agreement with all clauses of this Standard.
To submit a request for interpretation of this Standard, please send the following information to
inquiries@csagroup.org and include “Request for interpretation” in the subject line:
define the problem, making reference to the specific clause, and, where appropriate, include an illustrative sketch;
provide an explanation of circumstances surrounding the actual field condition; and
where possible, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.
Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.
This Standard is subject to review within five years from the date of publication. Suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquiries@csagroup.org and include “Proposal for change” in the subject line:
Standard designation (number);
relevant clause, table, and/or figure number;
wording of the proposed change; and
rationale for the change.
CSA C22.2 No. 320:19
1.1
This Standard covers controlled outlets, equipped with or without locking or non-locking receptacle configurations, for permanently connected branch circuit installation, rated up to and including 600 V, 60A and intended to be installed in ordinary locations in accordance with CSA C22.1, Canadian Electrical Code, Part I.
1.2
This Standard also covers outlets that might be installed in wet or damp category two locations when fitted with self-closing weather proof covers.
1.3
These requirements also cover controlled tamper-resistant and weather-resistant outlets.
1.4
This Standard does not directly apply to, but could include, additional requirements from the following standards:
CSA C22.2 No. 21, employing integral connectors etc. as part of a power supply cord or cord set;
CSA C22.2 No. 308, employing cord reels for general and special use, cord-connected multiple extension boxes and hospital grade power bars;
CSA C22.2 No. 42, employing current taps and adapters;
CSA C22.2 No. 43, employing male or female screw shells;
CSA C22.2 182.3, employing special use attachment plugs, receptacles, and connectors;
CSA C22.2 No. 223, employing Class 2 power supply outlets (USB) installed on faceplates of an outlet box, on a yoke similar to an outlet box-mounted receptacle, or mounted on a wall as a self-contained device; and
CSA C22.2 No. 144.1, employing Class A GFCI receptacles.
1.5
In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.