M00051044
New product
CSA C900.3:21 Thermal energy meters - Part 3: Data exchange and interfaces (Adopted CEN EN 1434-3:2015, third edition, 2015-12, with Canadian deviations)
standard by CSA Group, 04/01/2021
In stock
Warning: Last items in stock!
Availability date: 01/10/2022
(EN 1434-3:2015, MOD)
National Standard of Canada
(EN 1434-3:2015, MOD)
This national standard is based on EN 1434-3:2015 and parts of this standard are reproduced with the agreement of CEN, Rue de la Science 23 B–1040 Brussels, Belgium.
Canadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.
Disclaimer and exclusion of liability
This document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this document’s fitness for a particular purpose or use, its merchantability, or its non-infringement of any third party’s intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this document’s compliance with any applicable statute, rule, or regulation.
IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.
In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.
CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.
Intellectual property rights and ownership
As between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Group’s and/or others’ intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.
Patent rights
Attention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.
Authorized use of this document
This document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:
If this document is in electronic form:
load this document onto a computer for the sole purpose of reviewing it;
search and browse this document; and
print this document if it is in PDF format.
Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each such copy.
In addition, users may not and may not permit others to
alter this document in any way or remove this Legal Notice from the attached standard;
sell this document without authorization from CSA Group; or
make an electronic copy of this document.
If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.
CSA C900.3:21
April 2021
Title: Thermal energy meters — Part 3: Data exchange and interfaces
To register for e-mail notification about any updates to this publication
go to www.csagroup.org/store/
click on Product Updates
The List ID that you will need to register for updates to this publication is 2428546.
If you require assistance, please e-mail techsupport@csagroup.org or call 416-747-2233.
Visit CSA Group’s policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.
Canadian Standards Association (operating as “CSA Group”), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for- profit, nonstatutory, voluntary membership association engaged in standards development and certification activities.
CSA Group standards reflect a national consensus of producers and users — including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment.
Individuals, companies, and associations across Canada indicate their support for CSA Group’s standards development by
volunteering their time and skills to Committee work and supporting CSA Group’s objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSA Group’s total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSA Group’s standards development activities.
CSA Group offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, CSA Group regularly and continually audits and inspects products that bear the
CSA Group Mark.
In addition to its head office and laboratory complex in Toronto, CSA Group has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, CSA Group has developed the necessary expertise to meet its corporate mission: CSA Group is an independent service
organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.
For further information on CSA Group services, write to CSA Group
178 Rexdale Boulevard Toronto, Ontario, M9W 1R3 Canada
A National Standard of Canada is a standard developed by a Standards Council of Canada (SCC) accredited Standards Development Organization, in compliance with requirements and guidance set out by SCC. More information on National Standards of Canada can be found at www.scc.ca.
SCC is a Crown corporation within the portfolio of Innovation, Science and Economic Development (ISED) Canada. With the goal of enhancing Canada's economic competitiveness and social well- being, SCC leads and facilitates the development and use of national and international standards. SCC also coordinates Canadian participation in standards development, and identifies strategies to advance Canadian standardization efforts.
Accreditation services are provided by SCC to various customers, including product certifiers, testing laboratories, and standards development organizations. A list of SCC programs and accredited bodies is publicly available at www.scc.ca.
Standards Council of Canada 600-55 Metcalfe Street Ottawa, Ontario, K1P 6L5 Canada
Cette Norme Nationale du Canada est disponible en versions française et anglaise.
Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users to judge its suitability for their particular purpose.
®A trademark of the Canadian Standards Association, operating as “CSA Group”
National Standard of Canada
CSA C900.3:21
(EN 1434-3:2015, MOD)
Prepared by
European Committee for Standardization
Reviewed by
®A trademark of the Canadian Standards Association, operating as “CSA Group”
Published in April 2021 by CSA Group
A not-for-profit private sector organization
178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3
To purchase standards and related publications, visit our Online Store at www.csagroup.org/store/
or call toll-free 1-800-463-6727 or 416-747-4044.
ICS 17.200.10
ISBN 978-1-4883-3210-4
© 2021 Canadian Standards Association
All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.
CSA C900.3:21
(EN 1434-3:2015, MOD)
This is the third edition of CSA C900.3, Thermal energy meters — Part 3: Data exchange and interfaces, which is an adoption, with Canadian deviations, of CEN (European Committee for Standardization) Standard EN 1434-3 (third edition, 2015-12) titled Heat meters — Part 3: Data exchange and interfaces. It supersedes the previous edition published in 2013 as CAN/CSA-C900.3 (adopted EN 1434-3:2008).
For brevity, this Standard will be referred to as “CSA C900.3” throughout.
This Standard is one of a group of Standards on Thermal energy meters being adopted by CSA Group, which consists of the following:
CSA C900.1 (adopted EN 1434-1) — Part 1: General requirements;
CSA C900.2 (adopted EN 1434-2) — Part 2: Constructional requirements;
CSA C900.3 (adopted EN 1434-3) — Part 3: Data exchange and interfaces;
CSA C900.4 (adopted EN 1434-4) — Part 4: Pattern approval tests;
CSA C900.5 (adopted EN 1434-5) — Part 5: Initial verification tests; and
CSA C900.6 (adopted EN 1434-6) — Part 6: Installation, commissioning, operational monitoring and maintenance.
This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard.
This Standard was reviewed for Canadian adoption by the CSA Technical Committee on Thermal Energy Meters, under the jurisdiction of the CSA Strategic Steering Committee on Fuels and Appliances, and has been formally approved by the Technical Committee.
This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.
© 2021 Canadian Standards Association
All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. CEN material is reprinted with permission. Where the words “this European Standard” appear in the text, they should be interpreted as “this National Standard of Canada”.
Inquiries regarding this National Standard of Canada should be addressed to CSA Group
178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3 1-800-463-6727 • 416-747-4000
www.csagroup.org
To purchase standards and related publications, visit our Online Store at store.csagroup.org or call toll- free 1-800-463-6727 or 416-747-4044.
This Standard is subject to review within five years from the date of publication, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquiries@csagroup.org and include “Proposal for change” in the subject line:
Standard designation (number);
relevant clause, table, and/or figure number;
wording of the proposed change; and
rationale for the change.
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1434-3
December 2015
ICS 17.200.10 Supersedes EN 1434-3:2008
English Version
Heat meters - Part 3: Data exchange and interfaces
Compteurs d'énergie thermique - Partie 3 : Échange de données et interfaces
Wärmezähler - Teil 3: Datenaustausch und Schnittstellen
This European Standard was approved by CEN on 27 September 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION C OMITÉ E UR O PÉEN DE N ORMA LI SA TIO N EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.
Ref. No. EN 1434-3:2015 E
EN 1434-3:2015 (E)
Contents Page
European foreword 4
Scope 5
Normative references 5
Meter interfaces and protocols overview 6
Physical layer 6
General 6
Physical layer optical interface 6
Physical layer M-Bus 6
Physical layer wireless interface 6
Physical layer current loop interface 7
Physical layer Local Bus 7
Link layer 7
Link layer optical interface 7
Link layer of M-Bus and Local Bus 7
Link layer wireless interface 7
Link layer current-loop interface 7
Application layer 8
Application layer optical interface 8
Application layer M-Bus and Local Bus 9
Application 9
General 9
Physical layer 9
Link layer 9
Application layer 9
Control applications 9
Annex A (informative) Recommendation for heat meter test interface 10
Annex B (informative) Additional information for heat meters 11
Additional information regarding the EN 62056-21 protocol 11
Data set 11
Coding of the data set identification number 12
Annex C (informative) Automatic protocol detection and wake-up for the optical interface 21
Introduction 21
Trying EN 13757-2 protocol 21
Trying the EN 62056-21 protocol 21
Annex D (informative) Usage of heat meters in control applications 23
Heat meter 23
Controller 24
Annex E (informative) Protection techniques for M-Bus meters against surge/lightning 26
2 CSA C900.3:21
EN 1434-3:2015 (E)
Annex F (informative) Additional information about the master-unit for the M-Bus 30
Master side interface to the M-Bus 30
Master side interface for local data read out 30
Full size level converter 31
Bibliography 33
CSA C900.3:21 3
EN 1434-3:2015 (E)
European foreword
This document (EN 1434-3:2015) has been prepared by Technical Committee CEN/TC 294 “Communication systems for meters”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by June 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1434-3:2008.
The following significant editorial changes compared to the previous edition have been incorporated in this European Standard:
update of normative references;
update of Table 1 “Possible combinations of interfaces and standards”;
addition of explanations to Table B.1 “Values for "UU", register codes”. EN 1434 consists of the following parts, under the general title "Heat meters":
Part 1: General requirements
Part 2: Constructional requirements
Part 4: Pattern approval tests
Part 5: Initial verification tests
Part 6: Installation, commissioning, operational monitoring and maintenance
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
4 CSA C900.3:21
EN 1434-3:2015 (E)
Scope
This European Standard specifies the general requirements and applies to heat meters. Heat meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The meter indicates heat in legal units.
Part 3 specifies the data exchange between a meter and a readout device (POINT / POINT communication). For these applications using the optical readout head, the EN 62056-21 protocol is recommended.
For direct or remote local readout of a single or a few meters via a battery driven readout device, the physical layer of EN 13757-6 (local bus) is recommended.
For bigger networks with up to 250 meters, a master unit with AC mains supply according to EN 13757- 2 is necessary to control the M-Bus. For these applications the physical and link layer of EN 13757-2 and the application layer of EN 13757-3 is required.
For wireless meter communications, EN 13757-4 describes several alternatives of walk/drive-by readout via a mobile station or by using stationary receivers or a network. Both unidirectionally and bidirectionally transmitting meters are supported by this standard.
Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 13757-2, Communication systems for meters and remote reading of meters — Part 2: Physical and link layer
EN 13757-3:2013, Communication systems for meters and remote reading of meters — Part 3: Dedicated application layer
EN 13757-4, Communication systems for meters and remote reading of meters — Part 4: Wireless meter readout (Radio meter reading for operation in SRD bands)
EN 13757-6, Communication systems for meters — Part 6: Local Bus
EN 62056-21:2002, Electricity metering — Data exchange for meter reading, tariff and load control — Part 21: Direct local data exchange (IEC 62056-21:2002)
CSA C900.3:21 5