M00050376
New product
CSA C22.2 NO. 66.1-06 (R2020) Low Voltage Transformers - Part 1: General Requirements (Bi-National standard, with UL 5085-1), Includes Update No. 1, (2012) and Update No. 2 (2013)
standard by CSA Group, 04/01/2006
In stock
Warning: Last items in stock!
Availability date: 01/10/2022
(reaffirmed 2020)
Canadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.
Disclaimer and exclusion of liability
This document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this document’s fitness for a particular purpose or use, its merchantability, or its non-infringement of any third party’s intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this document’s compliance with any applicable statute, rule, or regulation.
IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.
In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.
CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.
Intellectual property rights and ownership
As between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Group’s and/or others’ intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.
Patent rights
Attention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.
Authorized use of this document
This document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:
If this document is in electronic form:
load this document onto a computer for the sole purpose of reviewing it;
search and browse this document; and
print this document if it is in PDF format.
Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each such copy.
In addition, users may not and may not permit others to
alter this document in any way or remove this Legal Notice from the attached standard;
sell this document without authorization from CSA Group; or
make an electronic copy of this document.
If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.
C22.2 No. 66.1-06
December 2013
Note: For information about the Standards Update Service or if you are missing any updates, go to
shop.csa.ca or e-mail techsupport@csagroup.org.
Title: Low Voltage Transformers — Part 1: General Requirements — originally published April 2006
Revisions issued: Update No. 1 — November 2012
The following revisions have been formally approved and are marked by a vertical line in the margin on the attached replacement pages:
Revised | Title page, Copyright page, Preface, Clauses 3.2.1, 12.3.3, and 26.3 |
New | Clause 11.5 |
Deleted | None |
Update your copy by inserting these revised pages.
Keep the pages you remove for reference.
CSA Group
CSA C22.2 No. 66.1-06
First Edition
Underwriters Laboratories Inc. UL 5085-1
First Edition
Low Voltage Transformers – Part 1: General Requirements
April 17, 2006
(Title Page Reprinted: December 6, 2013)
ANSI/UL 5085-1-2013
Commitment for Amendments
This standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”) and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CSA Group or UL at any time. Revisions to this standard will be made only after processing according to the standards development procedures of CSA Group and UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue.
ISBN 1-55436-830-8 © 2006 CSA Group
All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.
This Standard is subject to periodic review, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquires@csagroup.org and include “Proposal for change” in the subject line: Standard designation (number); relevant clause, table, and/or figure number; wording of the proposed change; and rationale for the change.
To purchase CSA Group Standards and related publications, visit CSA Group’s Online Store at shopcsa.ca or call toll-free 1-800-463-6727 or 416-747-4044.
Copyright © 2013 Underwriters Laboratories Inc.
UL’s Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of UL’s Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL.
The most recent designation of ANSI/UL 5085-1 as an American National Standard (ANSI) occurred on December 6, 2013. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface.
Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in UL’s On-Line Collaborative Standards Development System (CSDS) at https://csds.ul.com.
To purchase UL Standards, visit Comm 2000 at https://www.comm-2000.com/help/how_to_order.aspx or call toll-free 1-888-853-3503.
DECEMBER 6, 2013 CSA C22.2 NO. 66.1-06 UL 5085-1 3
CONTENTS
Preface 5
Scope 7
Definitions 8
General 9
Components 9
Reference Publications 10
3.3 Units of Measurement ....................................................... .10B
4 Construction ...................................................................... .10B
5 Mechanical Assembly .............................................................. .10B
Enclosures 13
General 13
Nonmetallic enclosures 14
Enclosures – specific environmental conditions 15
Mounting 15
Openings 16
Barriers for openings 17
Covers 17
Corrosion Resistance 18
Connections 20
General 20
Wiring terminals 20
Wire-binding screws and studs 20
Pressure terminal connectors 21
Leads 22
Internal Wiring 22
Grounding 22
Spacings and Insulation 24
General 24
Insulating material for mounting of low voltage live parts 25
Coil insulation 25
Insulation used in lieu of spacings 26
Double insulation 28
Switches, Protective Devices, and Wiring Devices 28
General 28
Switches 28
12.3 Protective devices ......................................................... .28A
13 Current-Carrying Parts ............................................................ .28A
14 Cord-Connected Transformers ..................................................... .28B
15 Strain Relief ..................................................................... .28B
Bushings for Low Voltage Wiring 29
Markings 31
General 31
Miscellaneous 32
Tests 33
Insulating Barriers Test 34
Pullout, Bending, and Twisting Tests 34
Bonding Conductor Test 34
Moisture Absorption Test 35
Hot, Flaming Oil Test 35
4 CSA C22.2 NO. 66.1-06 UL 5085-1 DECEMBER 6, 2013
Enclosure Tests 36
General 36
Compression test 36
Outlet box cover support and impact tests 37
Polymeric enclosure impact test 37
Induced Potential 38
Temperature (Heating) Test 38
Annex A (Informative)
A1 Production Line Dielectric Voltage Withstand Test 52
A2 Production Line Grounding Continuity Test 53
Annex B (Informative)
B1 Component Standards 54
Annex C (Informative)
C1 French Translation of Markings 55
DECEMBER 6, 2013 CSA C22.2 NO. 66.1-06 UL 5085-1 5
Preface
This is the harmonized CSA Group and UL standard for low voltage transformers. It is the first edition of CSA C22.2 No. 66.1 and the first edition of UL 5085-1. This harmonized standard has been jointly revised on December 6, 2013. For this purpose, CSA Group and UL are issuing revision pages dated December 6, 2013.
This harmonized standard was prepared by a Technical Harmonization Committee comprised of members from CSA Group, Underwriters Laboratories Inc. (UL), and representatives of the low voltage transformer manufacturing industry. The efforts and support of members of the Technical Harmonization Committee are gratefully acknowledged.
This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard.
This standard was reviewed by the CSA Subcommittee on C22.2 No. 66, under the jurisdiction of the CSA Technical Committee on Industrial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee.
This Standard has been approved by the American National Standards Institute (ANSI) as an American National Standard.
Where reference is made to a specific number of samples to be tested, the specified number is to be considered a minimum quantity.
Note: Although the intended primary application of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose.
Level of harmonization
This standard uses the IEC format but is not based on, nor is it to be considered equivalent to, an IEC standard. This standard is published as an equivalent standard for CSA Group and UL.
An equivalent standard is a standard that is substantially the same in technical content, except as follows: Technical national differences are allowed for codes and governmental regulations as well as those recognized as being in accordance with NAFTA Article 905, for example, because of fundamental climatic, geographical, technological, or infrastructural factors, scientific justification, or the level of protection that the country considers appropriate. Presentation is word for word except for editorial changes.
Reasons for Differences from IEC
The Technical Harmonization Committee identified the following IEC Standard within the scope of this standard: IEC 61558-1 (1998-07), Safety of power transformers, power supply units, and similar - Part 1: General requirements.
The THC determined that the safe use of transformers and reactors is critically dependent on the electrical system in which they are intended to be installed. Significant investigation is required to assess safety and system compatibility issues that may lead to harmonization of traditional North American transformers and reactors with those presently addressed in the known IEC standards. The THC agreed such future investigation might be facilitated by completion of harmonization of North American standards for transformers and reactors.
APRIL 17, 2006 CSA C22.2 NO. 66.1-06 UL 5085-1 7
PART 1: GENERAL REQUIREMENTS
Scope
These requirements cover the following types of transformers:
Air-cooled transformers and reactors for general use;
General purpose autotransformers;
Ferroresonant transformers;
Class 2 and Class 3 transformers (which are evaluated in accordance with Part 3);
Cord-connected transformers (which are evaluated in accordance with Part 2);
Transformers incorporating overcurrent or over-temperature protective devices, transient voltage surge protectors, or capacitors; and
Permanently-connected transformers.
These transformers are intended to be used in accordance with the National Electrical Code, ANSI/NFPA 70, or CSA C22.1, the Canadian Electrical Code, Part I. The Canadian Electrical Code defines low voltage as any voltage from 31 to 750 V inclusive and high voltage as any voltage above 750
V. The National Electrical Code, ANSI/NFPA 70, defines low voltage as any voltage up to 600 V, nominal. Therefore, low voltage transformers intended for use in Canada may be rated above 600 V up to 750 V. Low voltage transformers intended for use in the United States are rated up to 600 V. Where information in clauses and tables in this standard reference voltage ranges, the limit of 600 V applies in the United States, while the limit of 750 V applies in Canada.
The standard does not cover the following transformers:
Direct plug-in types;
Neon;
Liquid-immersed;
Variable voltage (Variac);
Low voltage landscape;
Swimming pool and spa:
Ignition;
High intensity lighting;
Toy;
Fluorescent lamp types;