M00050134
New product
CSA C22.2 No. 158:10 (R2019) Terminal Blocks, Includes Administrative Update (2021)
standard by CSA Group, 03/01/2010
In stock
Warning: Last items in stock!
Availability date: 01/10/2022
National Standard of Canada
(reaffirmed 2019)
REVISED OCTOBER 2019
Canadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.
Disclaimer and exclusion of liability
This document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this document’s fitness for a particular purpose or use, its merchantability, or its non-infringement of any third party’s intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this document’s compliance with any applicable statute, rule, or regulation.
IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.
In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.
CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.
Intellectual property rights and ownership
As between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Group’s and/or others’ intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.
Patent rights
Attention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.
Authorized use of this document
This document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:
If this document is in electronic form:
load this document onto a computer for the sole purpose of reviewing it;
search and browse this document; and
print this document if it is in PDF format.
Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each such copy.
In addition, users may not and may not permit others to
alter this document in any way or remove this Legal Notice from the attached standard;
sell this document without authorization from CSA Group; or
make an electronic copy of this document.
If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.
CSA C22.2 No. 158-10, Terminal blocks
National Standard of Canada — October 2019 |
Outside front cover, National Standard of Canada text, and title page. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. |
CSA C22.2 No. 158:10
March 2010
Title: Terminal blocks
To register for e-mail notification about any updates to this publication
go to store.csagroup.org
click on Product Updates
The List ID that you will need to register for updates to this publication is 2420599.
If you require assistance, please e-mail techsupport@csagroup.org or call 416-747-2233.
Visit CSA Group’s policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.
Canadian Standards Association (operating as “CSA Group”), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for- profit, nonstatutory, voluntary membership association engaged in standards development and certification activities.
CSA Group standards reflect a national consensus of producers and users — including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal governments in their regulations, particularly in the fields of health, safety, building and construction, and the environment.
Individuals, companies, and associations across Canada indicate their support for CSA Group’s standards development by
volunteering their time and skills to Committee work and supporting CSA Group’s objectives through sustaining memberships. The more than 7000 committee volunteers and the 2000 sustaining memberships together form CSA Group’s total membership from which its Directors are chosen. Sustaining memberships represent a major source of income for CSA Group’s standards development activities.
CSA Group offers certification and testing services in support of and as an extension to its standards development activities. To ensure the integrity of its certification process, CSA Group regularly and continually audits and inspects products that bear the
CSA Group Mark.
In addition to its head office and laboratory complex in Toronto, CSA Group has regional branch offices in major centres across Canada and inspection and testing agencies in eight countries. Since 1919, CSA Group has developed the necessary expertise to meet its corporate mission: CSA Group is an independent service
organization whose mission is to provide an open and effective forum for activities facilitating the exchange of goods and services through the use of standards, certification and related services to meet national and international needs.
For further information on CSA Group services, write to CSA Group
178 Rexdale Boulevard Toronto, Ontario, M9W 1R3 Canada
A National Standard of Canada is a standard developed by a Standards Council of Canada (SCC) accredited Standards Development Organization, in compliance with requirements and guidance set out by SCC. More information on National Standards of Canada can be found at www.scc.ca.
SCC is a Crown corporation within the portfolio of Innovation, Science and Economic Development (ISED) Canada. With the goal of enhancing Canada's economic competitiveness and social well- being, SCC leads and facilitates the development and use of national and international standards. SCC also coordinates Canadian participation in standards development, and identifies strategies to advance Canadian standardization efforts.
Accreditation services are provided by SCC to various customers, including product certifiers, testing laboratories, and standards development organizations. A list of SCC programs and accredited bodies is publicly available at www.scc.ca.
Standards Council of Canada 600-55 Metcalfe Street Ottawa, Ontario, K1P 6L5 Canada
Cette Norme Nationale du Canada n’est disponible qu’en anglais.
Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users to judge its suitability for their particular purpose.
®A trademark of the Canadian Standards Association, operating as “CSA Group”
National Standard of Canada
CSA C22.2 No. 158:10
®A trademark of the Canadian Standards Association, operating as “CSA Group”
Published in March 2010 by CSA Group
A not-for-profit private sector organization
178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3
To purchase standards and related publications, visit our Online Store at store.csagroup.org
or call toll-free 1-800-463-6727 or 416-747-4044.
ICS 29.120.20; 29.120.60
ISBN 978-1-55491-390-9
© 2010 Canadian Standards Association
All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.
© Canadian Standards Association Terminal blocks
Contents
Technical Committee on Industrial Products v Subcommittee on Terminal Assemblies vi Preface vii
Scope 1
General requirements and reference publications 1
General requirements 1
Reference publications 2
Definitions 2
Construction 3
Marking 5
Tests 6
General 6
Selection and preparation of specimens for static heating and dielectric strength tests 7
Secureness test 8
Static heating test 8
Pullout test 9
Dielectric strength test 9
Accelerated aging test 10
Verification of the performance of the terminal assemblies of a terminal block 10
Mounting security test 10
Corrosion cracking test 11
Aluminum conductors 11
Spring force connections 11
General 11
Secureness and pullout tests 11
Conditioning 12
Temperature test 12
Dielectric voltage-withstand test 12
Heat cycling test 12
Short-circuit current ratings for terminal blocks 12
Annexes
A (normative) — Short-circuit current ratings for terminal blocks 24
Tables
— Minimum acceptable spacings 13
— Stranded conductor for test 14
— Tightening torque for wire binding
screws and stud-and-nut type connectors 14
— Tightening torque for screws* 15
— Tightening torque for slotted-head screws smaller than No. 10 intended for use with No. 8 AWG or smaller conductors 16
March 2010 iii
C22.2 No. 158-10 © Canadian Standards Association
— Tightening torque for socket-head screws 16
— Values for secureness and pullout test 17
— Current for static heating test 18
— Tests and sequence of tests 20
— Forces for tab pull test 20
— Oven temperatures for aging test 20
— Sequence of tests for terminal blocks having spring force connections 21
Figures
— Arrangement for the verification of attachment of the conductor to the clamping unit and of the terminal assembly to the insulator 22
— Typical wiring for heating tests 23
iv March 2010
© Canadian Standards Association Terminal blocks
Preface
This is the third edition of CSA C22.2 No. 158, one of a series of Standards issued by the Canadian Standards Association under Part II of the Canadian Electrical Code. It supersedes the previous editions, published in 1987 and 1984.
This edition incorporates the following changes from the previous edition:
updates to other referenced standards;
a change in reference to CAN/CSA-C22.2 No. 0.17 for insulation materials testing;
the addition of requirements and markings for spring force terminals;
revision to the static heating test;
an updated corrosion cracking test;
the addition of short-circuit current ratings; and
an updated table for static heating test values.
For general information on the Standards of the Canadian Electrical Code, Part II, see the preface of CAN/CSA-C22.2 No. 0, General Requirements — Canadian Electrical Code, Part II.
This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard.
This Standard was prepared by the Subcommittee on Terminal Assemblies, under the jurisdiction of the Technical Committee on Industrial Products and the Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the Technical Committee.
Interpretations: The Strategic Steering Committee on Requirements for Electrical Safety has provided the following direction for the interpretation of standards under its jurisdiction: “The literal text shall be used in judging compliance of products with the safety requirements of this Standard. When the literal text cannot be applied to the product, such as for new materials or construction, and when a relevant committee interpretation has not already been published, CSA’s procedures for interpretation shall be followed to determine the intended safety principle.”
March 2010
Notes:
Use of the singular does not exclude the plural (and vice versa) when the sense allows.
Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose.
This publication was developed by consensus, which is defined by CSA Policy governing standardization — Code of good practice for standardization as “substantial agreement. Consensus implies much more than a simple majority, but not necessarily unanimity”. It is consistent with this definition that a member may be included in the Technical Committee list and yet not be in full agreement with all clauses of this publication.
CSA Standards are subject to periodic review, and suggestions for their improvement will be referred to the appropriate committee.
All enquiries regarding this Standard, including requests for interpretation, should be addressed to Canadian Standards Association, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6.
Requests for interpretation should
define the problem, making reference to the specific clause, and, where appropriate, include an illustrative sketch;
provide an explanation of circumstances surrounding the actual field condition; and
be phrased where possible to permit a specific “yes” or “no” answer.
Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and are published in CSA’s periodical Info Update, which is available on the CSA Web site at www.csa.ca.
March 2010 vii
© Canadian Standards Association Terminal blocks
C22.2 No. 158-10
Terminal blocks
Scope
1.1
This Standard covers assemblies of wiring terminals and supporting blocks for copper conductors, copper and aluminum conductors, and aluminum conductors rated at a maximum of 1500 V and 2000 kcmil, intended to provide for the connection of wiring designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I.
1.2
These terminal blocks are intended to support permanently and to insulate wire terminations and joints from each other and from the surface on which the terminal block is mounted, where the absence of such support or insulation could result in a hazard.
1.3
Terminal blocks can be of various designs, such as sectional, modular, or one-piece.
1.4
Terminal blocks can employ a combination of connectors.
1.5
In CSA standards, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.
1.6
The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only.
General requirements and reference publications
2.1 General requirements
General requirements applicable to this Standard are given in CAN/CSA-C22.2 No. 0, unless otherwise specified.
March 2010 1