M00001532
New product
AWS C4.3/C4.3M:2018 Recommended Practices for Safe Oxyfuel Gas Heating Torch Operation
standard by American Welding Society, 06/06/2017
In stock
Warning: Last items in stock!
Availability date: 01/03/2022
AWS C4.3/C4.3M:2018
An American National Standard
Approved by the American National Standards Institute
June 6, 2017
4th Edition
Supersedes AWS C4.3/C4.3M:2007
Prepared by the American Welding Society (AWS) C4 Committee on Oxyfuel Gas Welding and Cutting
Under the Direction of the AWS Technical Activities Committee
Approved by the AWS Board of Directors
The newly revised manual for oxyfuel gas heating torch operation includes the latest procedures to be used in conjunc- tion with oxyfuel gas heating equipment. The manual also includes the latest safety requirements. Complete lists of equipment are available from individual manufacturers.
ISBN: 978-0-87171-915-7
© 2017 by American Welding Society
All rights reserved Printed in the United States of America
Photocopy Rights. No portion of this standard may be reproduced, stored in a retrieval system, or transmitted in any form, including mechanical, photocopying, recording, or otherwise, without the prior written permission of the copyright owner.
Authorization to photocopy items for internal, personal, or educational classroom use only or the internal, personal, or educational classroom use only of specific clients is granted by the American Welding Society provided that the appropriate fee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, tel: (978) 750-8400; Internet:
<www.copyright.com».
Statement on the Use of American Welding Society Standards
All standards (codes, specifications, recommended practices, methods, classifications, and guides) of the American Welding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of the American National Standards Institute (ANSI). When AWS American National Standards are either incorporated in, or made part of, documents that are included in federal or state laws and regulations, or the regulations of other governmental bodies, their provisions carry the full legal authority of the statute. In such cases, any changes in those AWS standards must be approved by the governmental body having statutory jurisdiction before they can become a part of those laws and regulations. In all cases, these standards carry the full legal authority of the contract or other document that invokes the AWS standards. Where this contractual relationship exists, changes in or deviations from requirements of an AWS standard must be by agreement between the contracting parties.
AWS American National Standards are developed through a consensus standards development process that brings together volunteers representing varied viewpoints and interests to achieve consensus. While AWS administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in its standards.
AWS disclaims liability for any injury to persons or to property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance on this standard. AWS also makes no guarantee or warranty as to the accuracy or completeness of any information published herein.
In issuing and making this standard available, AWS is neither undertaking to render professional or other services for or on behalf of any person or entity, nor is AWS undertaking to perform any duty owed by any person or entity to someone else. Anyone using these documents should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. It is assumed that the use of this standard and its provisions is entrusted to appropriately qualified and competent personnel.
This standard may be superseded by new editions. This standard may also be corrected through publication of amendments or errata, or supplemented by publication of addenda. Information on the latest editions of AWS standards including amendments, errata, and addenda is posted on the AWS web page (www.aws.org). Users should ensure that they have the latest edition, amendments, errata, and addenda.
Publication of this standard does not authorize infringement of any patent or trade name. Users of this standard accept any and all liabilities for infringement of any patent or trade name items. AWS disclaims liability for the infringement of any patent or product trade name resulting from the use of this standard.
AWS does not monitor, police, or enforce compliance with this standard, nor does it have the power to do so.
Official interpretations of any of the technical requirements of this standard may only be obtained by sending a request, in writing, to the appropriate technical committee. Such requests should be addressed to the American Welding Society, Attention: Managing Director, Standards Development, 8669 NW 36 St, # 130, Miami, FL 33166 (see Annex D). With regard to technical inquiries made concerning AWS standards, oral opinions on AWS standards may be rendered. These opinions are offered solely as a convenience to users of this standard, and they do not constitute professional advice. Such opinions represent only the personal opinions of the particular individuals giving them. These individuals do not speak on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations of AWS. In addition, oral opinions are informal and should not be used as a substitute for an official interpretation.
This standard is subject to revision at any time by the AWS C4 Committee on Oxyfuel Gas Welding and Cutting. It must be reviewed every five years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recommendations, additions, or deletions) and any pertinent data that may be of use in improving this standard are required and should be addressed to AWS Headquarters. Such comments will receive careful consideration by the AWS C4 Committee on Oxyfuel Gas Welding and Cutting and the author of the comments will be informed of the Committee’s response to the comments. Guests are invited to attend all meetings of the AWS C4 Committee on Oxyfuel Gas Welding and Cutting to express their comments verbally. Procedures for appeal of an adverse decision concerning all such comments are provided in the Rules of Operation of the Technical Activities Committee. A copy of these Rules can be obtained from the American Welding Society, 8669 NW 36 St, # 130, Miami, FL 33166.
This page is intentionally blank.
AWS C4 Committee on Oxyfuel Gas Welding and Cutting
L. L. Liston, Chair Consultant
F. Johnson, Vice Chair Miller Electric Manufacturing Company
Naumann, Secretary American Welding Society
J. F. Henderson Victor Technologies, Incorporated
M. J. Hogan The Harris Products Group, A Lincoln Electric Company
R. K. Langford Victor Technologies, Incorporated
R. McGowan McGowan Technical Services, Incorporated
B. Overvaag Miller Electric Manufacturing Company
J. C. Papritan The Ohio State University
A. T. Sheppard The DuRoss Group
Advisors to the AWS C4 Committee on Oxyfuel Gas Welding and Cutting
J. D. Compton J. C. & Associates
M. E. Owens Columbus State Community College
This page is intentionally blank.
This foreword is not part of this standard but is included for information purposes only.
This manual is intended for use by the oxyfuel gas heating torch operator. It describes the oxyfuel gas heating torch operation process, including information relating to equipment, safety, and operating procedures.
Although many references are made to safe practice throughout this manual, it is strongly recommended that all opera- tors become thoroughly familiar with all aspects of a safe oxyfuel heating operation. A suggested standard is ANSI Z49.1, Safety in Welding, Cutting, and Allied Processes, available from the American Welding Society.
Much of the information in this manual is necessarily general in nature due to the large number of variations in equip- ment produced by various manufacturers. The manufacturer’s manual should be consulted for details on safe installation and use of all equipment. When equipment, or parts of equipment, need repair, the work shall be performed by personnel who have been properly instructed by the manufacturers of the equipment.
A vertical line in the margin or underlined text in clauses, tables, or figures indicates an editorial or technical change from the 2007 edition.
Comments and suggestions for the improvement of this standard are welcome. They should be sent to the Secretary, AWS C4 Committee on Oxyfuel Gas Welding and Cutting, American Welding Society, 8669 NW 36 St, # 130, Miami, FL 33166.
This page is intentionally blank.
Page No.
Personnel vii
Foreword ix
List of Tables xii
List of Figures xii
General Requirements 1
Scope 1
Units of Measure 1
Safety 1
Normative References 2
Terms and Definitions 3
Equipment and Supplies 3
Oxygen Supply 3
Fuel Supply 4
Maximum Acetylene Pressure 5
Pressure Regulators 5
Hoses and Fittings 7
Heating Torches 8
Heating Tip/Head 8
Maintenance of Heating Tips or Heads 10
Personal Protective Equipment (PPE) 10
Additional Safety Equipment 10
Safe Use, Handling, and Storage of Gas Cylinders 10
Safe Working Environment 11
Startup and Shutdown Procedures 12
Setting Up Equipment 12
Lighting the Torch 14
Equipment Shutdown 15
Flame Adjustment 15
Types of Flames 15
Backfire, Sustained Backfire, and Flashback Safety Note 16
Flame Heating Procedures 17
Testing 17
Troubleshooting 17
Flashback Arrestors and Check Valves 17
Flashback Arrestors 17
Check Valves 17
What to do in the Event of a Flashback 17
Flashback Prevention 17
Page No.
Annex A (Informative)—Informative References 19
Annex B (Informative)—Fuel Gas Withdrawal Rates 21
Annex C (Informative)—Fuel Gases 23
Annex D (Informative)—Requesting an Official Interpretation on an AWS Standard 25
List of AWS Documents on Oxyfuel Gas Welding and Cutting 27
Table Page No.
Acetylene Withdrawal 21
Propylene Withdrawal 22
Propane Withdrawal 22
Figure Page No.
Oxygen Cylinder 4
Typical Fuel Gas Cylinders 5
Pressure Regulators 6
Hoses and Fittings 7
Manual Heating Torch 8
Multi-Flame Heating Heads 9
Water-Cooled Flame Hardening Head 9
Carburizing Flame 16
Neutral Flame 16
Oxidizing Flame 16
This page is intentionally blank.
General Requirements
Scope. This manual describes the equipment, procedures, and safe practices for oxyfuel gas heating torch operation. It is written for the operators of torches using single or multiple heating tips and heads. It is also recommended for man- agement personnel associated with the oxyfuel gas heating torch operation and process.
Oxyfuel heating is an operation whereby various metals are heated in order to perform the following operations:
Straightening and bending with mechanical force
Flame straightening and cambering
Stress relieving
Preweld and postweld heating
Fusion of coatings
Flame hardening
Flame shrinking
The metal is heated by the direct application of single- or multi-flames to a desired elevated temperature. The heating process may be applied to all types of metal forms or shapes. An operator can make proper compensation for the effect of the metallurgical conditions, part geometry, and physical changes that may occur during the heating process.
In general, torch heating does not require any lengthy startup. Operations can be performed in most locations, in con- fined areas, under most conditions, and with relatively low-cost equipment. Torch heating can also be performed on completed structures without dismantling them. Although this recommended practice is not written with mandatory requirements, mandatory language, such as the use of “shall,” will be found in those portions of the document where failure to follow the instructions or procedures could produce inferior, misleading, or unsafe results.
Units of Measure. This standard makes use of both U.S. Customary Units and the International System of Units (SI). The latter are shown within brackets ([ ]) or in appropriate columns in tables and figures. The measurements may not be exact equivalents; therefore, each system must be used independently.
Safety. Safety issues and concerns are addressed in this standard although health issues and concerns are beyond the scope of this standard. Safety and health information is available from the following sources:
American Welding Society:
ANSI Z49.1, Safety in Welding, Cutting, and Allied Processes
AWS Safety and Health Fact Sheets
Other safety and health information on the AWS website Material or Equipment Manufacturers:
(1) Safety Data Sheets supplied by materials manufacturers (2) Operating Manuals supplied by equipment manufacturers