M00044803
New product
API RP 1170 Design and Operation of Solution-mined Salt Caverns Used for Natural Gas Storage, First Edition
standard by American Petroleum Institute, 07/01/2015
In stock
Warning: Last items in stock!
Availability date: 01/06/2022
API RECOMMENDED PRACTICE 1170 FIRST EDITION, JULY 2015
API publications necessarily address problems of a general nature. With respect to particular circumstances, local, state, and federal laws and regulations should be reviewed.
Neither API nor any of API's employees, subcontractors, consultants, committees, or other assignees make any warranty or representation, either express or implied, with respect to the accuracy, completeness, or usefulness of the information contained herein, or assume any liability or responsibility for any use, or the results of such use, of any information or process disclosed in this publication. Neither API nor any of API's employees, subcontractors, consultants, or other assignees represent that use of this publication would not infringe upon privately owned rights.
API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the accuracy and reliability of the data contained in them; however, the Institute makes no representation, warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or for the violation of any authorities having jurisdiction with which this publication may conflict.
API publications are published to facilitate the broad availability of proven, sound engineering and operating practices. These publications are not intended to obviate the need for applying sound engineering judgment regarding when and where these publications should be utilized. The formulation and publication of API publications is not intended in any way to inhibit anyone from using any other practices.
Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard is solely responsible for complying with all the applicable requirements of that standard. API does not represent, warrant, or guarantee that such products do in fact conform to the applicable API standard.
Classified areas may vary depending on the location, conditions, equipment, and substances involved in any given situation. Users of this Recommended Practice should consult with the appropriate authorities having jurisdiction.
Users of this Recommended Practice should not rely exclusively on the information contained in this document. Sound business, scientific, engineering, and safety judgment should be used in employing the information contained herein.
All rights reserved. No part of this work may be reproduced, translated, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the Publisher, API Publishing Services, 1220 L Street, NW, Washington, DC 20005.
Copyright © 2015 American Petroleum Institute
Nothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything contained in the publication be construed as insuring anyone against liability for infringement of letters patent.
Shall: As used in a standard, “shall” denotes a minimum requirement in order to conform to the specification.
Should: As used in a standard, “should” denotes a recommendation or that which is advised but not required in order to conform to the specification.
This document was produced under API standardization procedures that ensure appropriate notification and participation in the developmental process and is designated as an API standard. Questions concerning the interpretation of the content of this publication or comments and questions concerning the procedures under which this publication was developed should be directed in writing to the Director of Standards, American Petroleum Institute, 1220 L Street, NW, Washington, DC 20005. Requests for permission to reproduce or translate all or any part of the material published herein should also be addressed to the director.
Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-time extension of up to two years may be added to this review cycle. Status of the publication can be ascertained from the API Standards Department, telephone (202) 682-8000. A catalog of API publications and materials is published annually by API, 1220 L Street, NW, Washington, DC 20005.
Suggested revisions are invited and should be submitted to the Standards Department, API, 1220 L Street, NW, Washington, DC 20005, standards@api.org.
Page
Page
Design and Operation of Solution-mined Salt Caverns Used for Natural Gas Storage
This recommended practice (RP) provides the functional recommendations for salt cavern facilities used for natural gas storage service and covers facility geomechanical assessments, cavern well design and drilling, solution mining techniques and operations, including monitoring and maintenance practices. This RP is based on the accumulated knowledge and experience of geologists, engineers, and other personnel in the petroleum and gas storage industries and promotes public safety by providing a comprehensive set of design guidelines. This RP recognizes the nature of subsurface geological diversity and stresses the need for in-depth, site specific geomechanical assessments with a goal of long-term facility integrity and safety.
This RP includes the cavern well system (wellhead, wellbore, and cavern) from the emergency shutdown (ESD) valve down to the cavern and facilities having significant impact to safety and integrity of the cavern system.
This RP may be applied to existing facilities at the discretion of the user.
This RP does not apply to caverns used for the storage of liquid or liquefied petroleum products, brine production, or waste disposal; nor to caverns which are mechanically mined, or depleted hydrocarbon or aquifer underground gas storage systems.
This document was written to provide a technical reference for the development and operations of solution-mined salt caverns and is not intended to represent or reflect any Federal, State, or local regulatory requirement. Depending on location and nature of the project, the recommended practices herein may address items that are in conflict with some regulatory requirements. If this occurs, the regulatory requirement supersedes the recommended practice unless an appropriate waiver or variance is granted from the issuing agency. A thorough review of the applicable Federal, State, and local rules and regulations is to be performed prior to the design of solution-mined natural gas storage caverns to ensure ongoing compliance.
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
API Technical Report 5C3, Technical Report on Equations and Calculations for Casing, Tubing, and Line Pipe Used as Casing or Tubing; and Performance Properties Tables for Casing and Tubing
API Specification 10A, Specification for Cements and Materials for Well Cementing
API Recommended Practice 10F, Recommended Practice for Performance Testing of Cementing Float Equipment
ASTM D3967 1, Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
1 ASTM International, 100 Barr Harbor Drive, West Conshohocken, Pennsylvania 19428, www.astm.org.
1