M00044706
New product
API MPMS Chapter 14.12 Manual of Petroleum Measurement Standards, Chapter 14-Natural Gas Fluids Measurement, Section 12-Measurement of Gas by Vortex Meters, First Edition
Handbook / Manual / Guide by American Petroleum Institute, 03/01/2017
In stock
Warning: Last items in stock!
Availability date: 01/06/2022
FIRST EDITION, MARCH 2017
API publications necessarily address problems of a general nature. With respect to particular circumstances, local, state, and federal laws and regulations should be reviewed.
Neither API nor any of API's employees, subcontractors, consultants, committees, or other assignees make any warranty or representation, either express or implied, with respect to the accuracy, completeness, or usefulness of the information contained herein, or assume any liability or responsibility for any use, or the results of such use, of any information or process disclosed in this publication. Neither API nor any of API's employees, subcontractors, consultants, or other assignees represent that use of this publication would not infringe upon privately owned rights.
API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the accuracy and reliability of the data contained in them; however, the Institute makes no representation, warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or for the violation of any authorities having jurisdiction with which this publication may conflict.
API publications are published to facilitate the broad availability of proven, sound engineering and operating practices. These publications are not intended to obviate the need for applying sound engineering judgment regarding when and where these publications should be utilized. The formulation and publication of API publications is not intended in any way to inhibit anyone from using any other practices.
Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard is solely responsible for complying with all the applicable requirements of that standard. API does not represent, warrant, or guarantee that such products do in fact conform to the applicable API standard.
Users of this Standard should not rely exclusively on the information contained in this document. Sound business, scientific, engineering, and safety judgment should be used in employing the information contained herein.
All rights reserved. No part of this work may be reproduced, translated, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the Publisher, API Publishing Services, 1220 L Street, NW, Washington, DC 20005.
Copyright © 2017 American Petroleum Institute
Nothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything contained in the publication be construed as insuring anyone against liability for infringement of letters patent.
Shall: As used in a standard, “shall” denotes a minimum requirement in order to conform to the specification.
Should: As used in a standard, “should” denotes a recommendation or that which is advised but not required in order to conform to the specification.
May: As used in a standard, “may” denotes a course of action permissible within the limits of a specification. Can: As used in a standard, “can” denotes a statement of possibility or capability.
This document was produced under API standardization procedures that ensure appropriate notification and participation in the developmental process and is designated as an API standard. Questions concerning the interpretation of the content of this publication or comments and questions concerning the procedures under which this publication was developed should be directed in writing to the Director of Standards, American Petroleum Institute, 1220 L Street, NW, Washington, DC 20005. Requests for permission to reproduce or translate all or any part of the material published herein should also be addressed to the director.
Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-time extension of up to two years may be added to this review cycle. Status of the publication can be ascertained from the API Standards Department, telephone (202) 682-8000. A catalog of API publications and materials is published annually by API, 1220 L Street, NW, Washington, DC 20005.
Suggested revisions are invited and should be submitted to the Standards Department, API, 1220 L Street, NW, Washington, DC 20005, standards@api.org.
iii
Page
v
Page
This document describes the design, installation and operation of vortex shedding flowmeters for the measurement of hydrocarbon gases and steam flows.
Vortex shedding is a flow phenomenon that occurs when a bluff body is placed in flowing fluid and depending on the size and shape of a bluff body, under certain flowing conditions, alternating vortices are created on the downstream side of the body and detach periodically from either side of the body. The fluid flow past the object, often referred to as the vortex shedder, creates alternating low-pressure vortices on the downstream side of the object.
The vortex shedding frequency, with a few exceptions, is proportional to flow rate. Hence, by monitoring the shedding frequency and through numerical computational techniques, the fluid velocity and flow rate at the actual flowing conditions can be determined.
vi
Chapter 14—Natural Gas Fluid Measurement Section 12—Measurement of Gas by Vortex Meters
This Standard addresses the following:
provides generic information on full-bore vortex shedding flowmeters, including glossary, and sets of engineering equations useful in specifying performance;
describes vortex shedding flowmeters in which alternating vortices are shed from one or more bluff bodies installed in a closed conduit;
describes how the vortex shedding frequency is used to determine the velocity to infer the volume, mass, and/or energy flow rate and the total gas flow through the meter over a specific time interval;
applies only to single phase gas flows in closed conduit that are steady or vary slowly in time. For fiscal measurement, the output of the flow rate shall be within the acceptable limits of steady state flow rate;
describes the physical components of vortex shedding flowmeters and identifies need for inspection, certification, and material traceability;
addresses the effect of gas properties, installation, and process conditions that may affect the measurement uncertainty and describes guidelines for reducing or eliminating their influences;
defines the method for calculating uncertainty of the flow rate measurement;
defines the meter output requirements and necessary information pertaining to the meter output for the purpose of fiscal measurement of gas; and
provides calibration and/or performance verification guidance for the field application.
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
API MPMS Chapter 4.5, Master Meter Provers, 2011
API MPMS Chapter 4.2, Displacement Provers, Reaffirmed 2011
API MPMS Chapter 14.2, AGA Report No. 8/GPA 8185, Compressibility Factors of Natural Gas and other Related Hydrocarbon Gases, Reaffirmed 2012
1