M00044478
New product
API RP 5EX Design, Verification, and Application of Solid Expandable Systems, First Edition
standard by American Petroleum Institute, 05/01/2018
In stock
Warning: Last items in stock!
Availability date: 01/06/2022
API RECOMMENDED PRACTICE 5EX FIRST EDITION, MAY 2018
API publications necessarily address problems of a general nature. With respect to particular circumstances, local, state, and federal laws and regulations should be reviewed.
Neither API nor any of API's employees, subcontractors, consultants, committees, or other assignees make any warranty or representation, either express or implied, with respect to the accuracy, completeness, or usefulness of the information contained herein, or assume any liability or responsibility for any use, or the results of such use, of any information or process disclosed in this publication. Neither API nor any of API's employees, subcontractors, consultants, or other assignees represent that use of this publication would not infringe upon privately owned rights.
API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the accuracy and reliability of the data contained in them; however, the Institute makes no representation, warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or for the violation of any authorities having jurisdiction with which this publication may conflict.
API publications are published to facilitate the broad availability of proven, sound engineering and operating practices. These publications are not intended to obviate the need for applying sound engineering judgment regarding when and where these publications should be utilized. The formulation and publication of API publications is not intended in any way to inhibit anyone from using any other practices.
Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard is solely responsible for complying with all the applicable requirements of that standard. API does not represent, warrant, or guarantee that such products do in fact conform to the applicable API standard.
Users of this Recommended Practice should not rely exclusively on the information contained in this document. Sound business, scientific, engineering, and safety judgment should be used in employing the information contained herein.
All rights reserved. No part of this work may be reproduced, translated, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the Publisher, API Publishing Services, 1220 L Street, NW, Washington, DC 20005.
Copyright © 2018 American Petroleum Institute
Nothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything contained in the publication be construed as insuring anyone against liability for infringement of letters patent.
The verbal forms used to express the provisions in this recommended practice are as follows:
the term “shall” denotes a minimum requirement in order to conform to the recommended practice;
the term “should” denotes a recommendation or that which is advised but not required in order to conform to the recommended practice;
the term “may” is used to express permission or a provision that is optional; and
the term “can” is used to express possibility or capability.
This document was produced under API standardization procedures that ensure appropriate notification and participation in the developmental process and is designated as an API standard. Questions concerning the interpretation of the content of this publication or comments and questions concerning the procedures under which this publication was developed should be directed in writing to the Director of Standards, American Petroleum Institute, 1220 L Street, NW, Washington, DC 20005. Requests for permission to reproduce or translate all or any part of the material published herein should also be addressed to the director.
Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-time extension of up to two years may be added to this review cycle. Status of the publication can be ascertained from the API Standards Department, telephone (202) 682-8000. A catalog of API publications and materials is published annually by API, 1220 L Street, NW, Washington, DC 20005.
Suggested revisions are invited and should be submitted to the Standards Department, API, 1220 L Street, NW, Washington, DC 20005, standards@api.org.
iii
Page
v
Page
vi
The goals of this recommended practice are to:
establish common terms and means that can be used by the manufacturers and end users,
educate the end users and manufacturers,
ensure that users, suppliers, and manufacturers understand and can identify the critical aspects of the technology,
accelerate the technology-expand the user base,
institute a uniform evaluation process, and
understand the reliability of the technology.
Users should be aware that requirements outlined in this document may be needed for individual applications. This document is not intended to inhibit a supplier/manufacturer from offering, or the user/purchaser from accepting, alternative equipment or engineering solutions. This may be particularly applicable where there is innovative or developing technology.
Design, Verification, and Application of Solid Expandable Systems
This recommended practice establishes guidance for design, system verification, and application guidelines of solid expandable systems for the oil and gas industries. This document is not to be used as a specification for purchasing equipment; it is intended for consideration by users for well applications and the design of solid expandable systems.
Expandable systems will include drilling liners, hangers, connections, receivers, and launchers for downhole use as defined herein. Only permanently installed equipment/components are covered by this recommended practice. Slotted liners and tools used for the expansion of the tubular goods (such as, but not limited to, implementation tools, pumps, jacks, and expansion tools) are not addressed by this recommended practice.
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document applies (including any addenda/errata).
API Recommended Practice 5A5, Field Inspection of New Casing, Tubing, and Plain-end Drill Pipe
API Recommended Practice 5C5, Procedures for Testing Casing and Tubing Connections
API Specification 5CT, Casing and Tubing
API Specification Q1, Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry
API Technical Report 5C3, Calculating Performance Properties of Pipe Used as Casing or Tubing NACE TM0192 1, Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments NORSOK M-710 2, Qualification of nonmetallic sealing materials and manufactures
For the purposes of this document, the following terms and definitions apply.
Product comprised of more than one component.
Pipe run from the surface or mudline and intended to line the walls of a drilled well.
1 National Association of Corrosion Engineers,15835 Park Ten Place, Houston, TX 77084, www.nace.org. 2 Standards Norway, P.O. Box 252, NO-1326, Lysaker, Norway, www.standard.no.