M00044364
New product
API RP 17P Recommended Practice for Subsea Structures and Manifolds, Second Edition
standard by American Petroleum Institute, 01/01/2019
In stock
Warning: Last items in stock!
Availability date: 01/06/2022
API RECOMMENDED PRACTICE 17P SECOND EDITION, JANUARY 2019
API publications necessarily address problems of a general nature. With respect to particular circumstances, local, state, and federal laws and regulations should be reviewed.
Neither API nor any of API’s employees, subcontractors, consultants, committees, or other assignees make any warranty or representation, either express or implied, with respect to the accuracy, completeness, or usefulness of the information contained herein, or assume any liability or responsibility for any use, or the results of such use, of any information or process disclosed in this publication. Neither API nor any of API’s employees, subcontractors, consultants, or other assignees represent that use of this publication would not infringe upon privately owned rights.
API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to ensure the accuracy and reliability of the data contained in them; however, the Institute makes no representation, warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or for the violation of any authorities having jurisdiction with which this publication may conflict.
API publications are published to facilitate the broad availability of proven, sound engineering and operating practices. These publications are not intended to obviate the need for applying sound engineering judgment regarding when and where these publications should be utilized. The formulation and publication of API publications is not intended in any way to inhibit anyone from using any other practices.
Any manufacturer marking equipment or materials in conformance with the marking requirements of an API document is solely responsible for complying with all the applicable requirements of that document. API does not represent, warrant, or guarantee that such products do in fact conform to the applicable API publication.
Users of this Recommended Practice should not rely exclusively on the information contained in this document. Sound business, scientific, engineering, and safety judgment should be used in employing the information contained herein.
All rights reserved. No part of this work may be reproduced, translated, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the Publisher, API Publishing Services, 1220 L Street, NW, Washington, DC 20005.
Copyright © 2019 American Petroleum Institute
Nothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything contained in the publication be construed as insuring anyone against liability for infringement of letters patent.
The verbal forms used to express the provisions in this document are as follows.
Shall: As used in a standard, “shall” denotes a minimum requirement in order to conform to the standard.
Should: As used in a standard, “should” denotes a recommendation or that which is advised but not required in order to conform to the standard.
May: As used in a standard, “may” denotes a course of action permissible within the limits of a standard. Can: As used in a standard, “can” denotes a statement of possibility or capability.
This document was produced under API standardization procedures that ensure appropriate notification and participation in the developmental process and is designated as an API standard. Questions concerning the interpretation of the content of this publication or comments and questions concerning the procedures under which this publication was developed should be directed in writing to the Director of Standards, American Petroleum Institute, 1220 L Street, NW, Washington, DC 20005. Requests for permission to reproduce or translate all or any part of the material published herein should also be addressed to the director.
Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-time extension of up to two years may be added to this review cycle. Status of the publication can be ascertained from the API Standards Department, telephone (202) 682-8000. A catalog of API publications and materials is published annually by API, 1220 L Street, NW, Washington, DC 20005.
Suggested revisions are invited and should be submitted to the Standards Department, API, 1220 L Street, NW, Washington, DC 20005, standards@api.org.
iii
The first edition of API 17P was published on January 30, 2013. The first edition of API RP 17P was a U.S. National Adoption of ISO 13628-15. The first edition of ISO 13628-15 was published in the third quarter of 2011 and was created by a joint API/ISO task group. This second edition of API 17P has been completely rewritten as recommended practice (RP). While the scope is similar to the first edition of API RP 17P, the material section has been rewritten and Sections 8 through 12 have been added.
The intent of this RP is to provide guidance for the specification, design, construction, transportation, installation, maintenance, and operation of subsea structures and manifolds.
This standard is under the jurisdiction of API Subcommittee 17 on Subsea Production Systems. Nothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything contained in the publication be construed as insuring anyone against liability for infringement of letters patent.
This is the Second Edition.
API Subcommittee 17 documents consist of the following:
Recommended Practice 17A, Design and Operation of Subsea Production Systems—General Requirements and Recommendations
Recommended Practice 17B, Recommended Practice for Flexible Pipe
Specification 17D, Design and Operation of Subsea Production Systems—Subsea Wellhead and Tree Equipment
Specification 17E, Specification for Subsea Umbilicals
Standard 17F, Standard for Subsea Production Control Systems
Recommended Practice 17G, Recommended Practice for Completion/Workover Risers
Recommended Practice 17H, Recommended Practice for Remotely Operated Vehicle (ROV) Interfaces on Subsea Production Systems
Specification 17J, Specification for Unbonded Flexible Pipe
Specification 17K, Specification for Bonded Flexible Pipe
Specification 17L1, Specification for Flexible Pipe Ancillary Equipment
Recommended Practice 17L2, Recommended Practice for Flexible Pipe Ancillary Equipment
Recommended Practice 17N, Recommended Practice on Subsea Production System Reliability, Technical Risk, and Integrity Management
Standard 17O, Standard for Subsea High Integrity Pressure Protection Systems (HIPPS)
Recommended Practice 17P, Design and Operation of Subsea Production Systems—Subsea Structures and Manifolds
Recommended Practice 17Q, Recommended Practice on Subsea Equipment Qualification
Recommended Practice 17R, Recommended Practice for Flowline Connectors and Jumpers
Recommended Practice 17S, Recommended Practice for the Design, Testing, and Operation of Subsea Multiphase Flow Meters
Recommended Practice 17U, Recommended Practice for Wet and Dry Thermal Insulation of Subsea Flowlines and Equipment
Recommended Practice 17V, Recommended Practice for Analysis, Design, Installation, and Testing of Safety Systems for Subsea Applications
Recommended Practice 17W, Recommended Practice for Subsea Capping Stacks
Technical Report 17TR1, Evaluation Standard for Internal Pressure Sheath Polymers for High Temperature Flexible Pipes
Technical Report 17TR2, The Ageing of PA-11 in Flexible Pipes
Technical Report 17TR3, An Evaluation of the Risks and Benefits of Penetrations in Subsea Wellheads Below the BOP Stack
Technical Report 17TR4, Subsea Equipment Pressure Ratings
Technical Report 17TR5, Avoidance of Blockages in Subsea Production Control and Chemical Injection Systems
Technical Report 17TR6, Attributes of Production Chemicals in Subsea Production Systems
Technical Report 17TR7, Verification and Validation of Subsea Connectors
Technical Report 17TR8, High-pressure High-temperature Design Guidelines
Technical Report 17TR9, Umbilical Termination Assembly (UTA) Selection and Sizing Recommendations
Technical Report 17TR10, Subsea Umbilical Termination (SUT) Design Recommendations
Technical Report 17TR11, Pressure Effects on Subsea Hardware During Flowline Pressure Testing in Deep Water
Technical Report 17TR12, Consideration of External Pressure in the Design and Pressure Rating of Subsea Equipment
Technical Report 17TR13, General Overview of Subsea Production Systems
Technical Report 17TR15, API 17H Hydraulic Interfaces for Hot Stabs
It is important that users of this part of API 17 be aware that further or differing requirements can be needed for individual applications. This part of API 17 is not intended to inhibit a vendor from offering, or the purchaser from accepting, alternative equipment engineering solutions for the individual application. This can be particularly applicable if there is innovative or developing technology. If an alternative is offered, it is the responsibility of the vendor to identify any variations from this part of API 17 and provide details.
Recommended Practice for Subsea Structures and Manifolds
This document addresses recommendations for subsea structures and manifolds, within the frameworks set forth by recognized and accepted industry specifications and standards.
Equipment within the scope of this document is listed below (see Figure 1):
the following structural components and piping systems of subsea production systems:
production and injection manifolds,
modular and integrated single satellite and multi-well templates,
subsea processing and subsea boosting stations,
flow control modules,
flowline riser bases and export riser bases,
pipeline end manifolds (PLEM),
pipeline end terminations (PLET),
T- and Y-connections,
subsea isolation valves (SSIV);
the following structural components of subsea production system:
subsea controls and distribution structures,
other subsea structures;
protection structures associated with the above components;
foundations and mounting bases to support above structures;
The following components and their applications are outside the scope of this document:
pipeline and manifold valves;
flowline and tie-in connectors;
choke valves;
flow control valves;
multi-phase flow meters;
pressure vessels;
production control systems.
NOTE General information regarding these topics can be found in additional publications, such as API 17A, API 17E, and API 2C.
1