M00044288
New product
API RP 17H Recommended Practice for Remotely Operated Vehicle (ROV) Interfaces on Subsea Production Systems, Second Edition, Includes Errata (2014)
standard by American Petroleum Institute, 06/01/2013
In stock
Warning: Last items in stock!
Availability date: 01/06/2022
API RECOMMENDED PRACTICE 17H SECOND EDITION, JUNE 2013
ERRATA, JANUARY 2014
API publications necessarily address problems of a general nature. With respect to particular circumstances, local, state, and federal laws and regulations should be reviewed.
API is not undertaking to meet the duties of employers, manufacturers, or suppliers to warn and properly train and equip their employees, and others exposed, concerning health and safety risks and precautions, nor undertaking their obligations under local, state, or federal laws.
Information concerning safety and health risks and proper precautions with respect to particular materials and conditions should be obtained from the employer, the manufacturer or supplier of that material, or the material safety datasheet.
Neither API nor any of API's employees, subcontractors, consultants, committees, or other assignees make any warranty or representation, either express or implied, with respect to the accuracy, completeness, or usefulness of the information contained herein, or assume any liability or responsibility for any use, or the results of such use, of any information or process disclosed in this publication. Neither API nor any of API's employees, subcontractors, consultants, or other assignees represent that use of this publication would not infringe upon privately owned rights.
API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the accuracy and reliability of the data contained in them; however, the Institute makes no representation, warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or for the violation of any authorities having jurisdiction with which this publication may conflict.
API publications are published to facilitate the broad availability of proven, sound engineering and operating practices. These publications are not intended to obviate the need for applying sound engineering judgment regarding when and where these publications should be utilized. The formulation and publication of API publications is not intended in any way to inhibit anyone from using any other practices.
Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard is solely responsible for complying with all the applicable requirements of that standard. API does not represent, warrant, or guarantee that such products do in fact conform to the applicable API standard.
All rights reserved. No part of this work may be reproduced, translated, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the Publisher, API Publishing Services, 1220 L Street, NW, Washington, DC 20005.
Copyright © 2013 American Petroleum Institute
This standard shall become effective on the date printed on the cover but may be used voluntarily from the date of distribution.
Standards referenced herein may be replaced by other international or national standards that can be shown to meet or exceed the requirements of the referenced standard.
This American National Standard is under the jurisdiction of the API Subcommittee on Subsea Production Systems. Nothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything contained in the publication be construed as insuring anyone against liability for infringement of letters patent.
This document was produced under API standardization procedures that ensure appropriate notification and participation in the developmental process and is designated as an API standard. Questions concerning the interpretation of the content of this publication or comments and questions concerning the procedures under which this publication was developed should be directed in writing to the Director of Standards, American Petroleum Institute, 1220 L Street, NW, Washington, DC 20005. Requests for permission to reproduce or translate all or any part of the material published herein should also be addressed to the director.
Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-time extension of up to two years may be added to this review cycle. Status of the publication can be ascertained from the API Standards Department, telephone (202) 682-8000. A catalog of API publications and materials is published annually by API, 1220 L Street, NW, Washington, DC 20005.
Suggested revisions are invited and should be submitted to the Standards Department, API, 1220 L Street, NW, Washington, DC 20005, standards@api.org.
iii
Page
v
Page
vi
Page
This recommended practice has been prepared to provide general recommendations and overall guidance for the design and operation of remotely operated tools comprising ROT and ROV tooling used on subsea production systems for the petroleum and natural gas industries worldwide.
Specific recommendations are used where a standard design or operating principle has been adopted in the industry for a period of time. Requirements valid for certain geographic areas or environmental conditions are included where applicable.
The functional recommendations for the tooling systems and interfaces on the subsea production system allow alternative solutions to suit the field specific requirements. The intention is to facilitate and complement the decision process rather than replace individual engineering judgment and to provide positive guidance for the selection of an optimum solution.
vii
Remotely Operated Tools and Interfaces on Subsea Production Systems
This document provides recommendations for development and design of remotely operated subsea tools and interfaces on subsea production systems in order to maximize the potential of standardizing equipment and design principles.
This document does not cover manned intervention, internal wellbore intervention, internal flowline inspection, tree running, and tree running equipment. However, all the related subsea remotely operated vehicle/remotely operated tool (ROV/ROT) interfaces are covered by this standard. It is applicable to the selection, design, and operation of ROTs and ROVs including ROV tooling, hereafter defined in a common term as subsea intervention systems.
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
API Recommended Practice 17A/ISO 13628-1, Design and operation of subsea production systems— General requirements and recommendations, including Addendum 1 (2006)
API Specification 17D, Specification for Subsea Wellhead and Tree Equipment
API Specification Q1/ISO 29001, Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry
ISO 9001:2008 1, Quality Management Systems—Requirements
ASNT SNT-TC-1A 2, Recommended Practice and ASNT Standard Topical Outlines for Qualification of Nondestructive Testing Personnel
BS 7172-2 3, Code of practice for safe use of cranes—Part 2: Inspection, testing and examination
DNV 2.7 4, Series
For the purposes of this document, the following terms and definitions apply.
All equipment involved in the launch and recovery of the ROV and ROT system.
International Organization for Standardization, 1, ch. de la Voie-Creuse, Case postale 56, CH-1211 Geneva 20, Switzerland, www.iso.org.
American Society for Nondestructive Testing, 1711 Arlingate Lane, P.O. Box 28518, Columbus, Ohio 43228, www.asnt.org.
British Standards Institution, Chiswick High Road, London W4 4AL, United Kingdom, www.bsi-global.com.
Det Norske Veritas, Veritasveien 1, 1322, Hovik, Oslo, Norway, www.dnv.com.
1