New Reduced price! API RP 5C1 (R2020) View larger

API RP 5C1 (R2020)

M00043945

New product

API RP 5C1 (R2020) Recommended Practice for Care and Use of Casing and Tubing

standard by American Petroleum Institute, 05/01/1999

Full Description

Please note that any addenda or errata may not be included in translated editions of this standard.

Covers use, transportation, storage, handling, and reconditioning of casing and tubing.

More details

In stock

$55.80

-55%

$124.00

More info

5C1 text


Recommended Practice for Care and Use of Casing and Tubing


API RECOMMENDED PRACTICE 5C1 EIGHTEENTH EDITION, MAY 1999


REAFFIRMED, JULY 2020




Recommended Practice for Care and Use of Casing and Tubing


Upstream Segment


API RECOMMENDED PRACTICE 5C1 EIGHTEENTH EDITION, MAY 1999


REAFFIRMED, JULY 2020



SPECIAL NOTES


API publications necessarily address problems of a general nature. With respect to partic- ular circumstances, local, state, and federal laws and regulations should be reviewed.

API is not undertaking to meet the duties of employers, manufacturers, or suppliers to warn and properly train and equip their employees, and others exposed, concerning health and safety risks and precautions, nor undertaking their obligations under local, state, or fed- eral laws.

Information concerning safety and health risks and proper precautions with respect to par- ticular materials and conditions should be obtained from the employer, the manufacturer or supplier of that material, or the material safety data sheet.

Nothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or prod- uct covered by letters patent. Neither should anything contained in the publication be con- strued as insuring anyone against liability for infringement of letters patent.

Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. Sometimes a one-time extension of up to two years will be added to this review cycle. This publication will no longer be in effect five years after its publication date as an operative API standard or, where an extension has been granted, upon republication. Status of the publication can be ascertained from the API Upstream Segment [telephone (202) 682- 8000]. A catalog of API publications and materials is published annually and updated quar- terly by API, 200 Massachusetts Avenue, NW, Suite 1100, Washington, DC 20001.

This document was produced under API standardization procedures that ensure appropri- ate notification and participation in the developmental process and is designated as an API standard. Questions concerning the interpretation of the content of this standard or com- ments and questions concerning the procedures under which this standard was developed should be directed in writing to the general manager of the Upstream Segment, American Petroleum Institute, 200 Massachusetts Avenue, NW, Suite 1100, Washington, DC 20001. Requests for permission to reproduce or translate all or any part of the material published herein should also be addressed to the general manager.

API standards are published to facilitate the broad availability of proven, sound engineer- ing and operating practices. These standards are not intended to obviate the need for apply- ing sound engineering judgment regarding when and where these standards should be utilized. The formulation and publication of API standards is not intended in any way to inhibit anyone from using any other practices.

Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard is solely responsible for complying with all the applicable requirements of that standard. API does not represent, warrant, or guarantee that such prod- ucts do in fact conform to the applicable API standard.


All rights reserved. No part of this work may be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the Publisher,

API Publishing Services, 200 Massachusetts Avenue, NW, Suite 1100, Washington, DC 20001.

UNCONTROLLED COPY--Copyright 1999 American Petroleum Institute

Copyright © 1999 American Petroleum Institute


FOREWORD


The bar motations identify parts of this standard that have been changed from the previous API edition.

This standard is under the jurisdiction of the API Committee on Standardization of Tubu- lar Goods and includes items approved by the letter ballot through 1999.

API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the accuracy and reliability of the data contained in them; however, the Institute makes no representation, warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or for the violation of any federal, state, or municipal regulation with which this publication may conflict.

Suggested revisions are invited and should be submitted to the general manager of the Upstream Segment, American Petroleum Institute, 200 Massachusetts Avenue, NW, Suite 1100, Washington, DC 20001.


UNCONTROLLED COPY--Copyright 1999 American Petroleum Institute

iii


  1. SCOPE 1

  2. REFERENCES 1

    1. General 1

    2. Requirements 1

    3. Equivalent Standards 1

  3. DEFINITIONS 1

  4. RUNNING AND PULLING CASING 1

    1. Preparation and Inspection Before Running 1

    2. Drifting of Casing 2

    3. Stabbing, Making Up, and Lowering 3

    4. Field Makeup 3

    5. Casing Landing Procedure 5

    6. Care of Casing in Hole 5

    7. Recovery of Casing 5

    8. Causes of Casing Troubles 5

  5. RUNNING AND PULLING TUBING 7

    1. Preparation and Inspection Before Running 7

    2. Stabbing, Making Up, and Lowering 19

    3. Field Makeup 20

    4. Pulling Tubing 21

    5. Causes of Tubing Troubles 21

  6. TRANSPORTATION, HANDLING, AND STORAGE 22

    1. Transportation 22

    2. Handling 23

    3. Storage 23

  7. INSPECTION AND CLASSIFICATION OF USED CASING AND TUBING 23

    1. Inspection and Classification Procedures 23

    2. General 29

    3. Service Rating 29

  8. RECONDITIONING 30

  9. FIELD WELDING OF ATTACHMENTS ON CASING 30

    1. Introduction 30

    2. Requirements of Welds 30

    3. Process 30

    4. Filler for Arc Welding 30

    5. Preparation of Base Metal 31

    6. Preheating and Cooling 31

      UNCONTROLLED COPY--Copyright 1999 American Petroleum Institute

    7. Welding Technique 31


Tables

  1. Casing Makeup Torque Guideline, 8-Round Thread Casing 8

  2. Torque Values for Extreme-Line Casing 20

  3. Tubing Makeup Torque Guidelines—Round Thread Tubing 24

  4. Classification and Color Coding of Used Casing and Tubing 28

    UNCONTROLLED COPY--Copyright 1999 American Petroleum Institute

  5. Color Code Identification 29


Recommended Practice for Care and Use of Casing and Tubing


  1. Scope

    Note: No provision of this recommended practice shall be cause for rejection of casing or tubing provided the threads are in accordance with the requirements of the latest edition of API Standard 5B.

    1. The statements on corrosion of casing and tubing as given herein were developed with the cooperation of the Tech- nical Practices Committee on Corrosion of Oil and Gas Well Equipment, NACE International (formerly the National Asso- ciation of Corrosion Engineers).

    2. It is suggested that the selection of a thread compound for casing and tubing be given careful consideration by the user, bearing in mind that a satisfactory compound should possess certain properties, the major of which are (a) to lubri- cate the thread surfaces to facilitate joint makeup and break- out without galling, and (b) to seal voids between the mating thread surfaces and effectively prevent leakage. Compounds that have given outstanding service for casing and tubing under both laboratory and field conditions are described in the latest edition of API Bulletin 5A2.

      Note: Thread compounds described in the latest edition of API Bul- letin 5A2 should not be used on rotary shouldered connections.

    3. Some generalized suggestions on prevention of damage to casing and tubing by corrosive fluids are given in 4.8.16 and 5.5.15. It is not, however, within the scope of this recom- mended practice to provide detailed suggestions for corrosion control under specific conditions. Many variables may be involved in a specific corrosion problem and interrelated in such a complex fashion as to require detailed attention to the specific problem. For more complete technical information on specific corrosion problems, the user should consult the official publication of NACE International, Corrosion, or contact: Chairman, Technical Practices Committee on Corro- sion of Oil and Gas Well Equipment, T-1, NACE Int’l, 1440 South Creek Drive, P.O. Box 218340, Houston, Texas 77218- 8340.


  2. References


    1. GENERAL

      This recommended practice includes by reference, either in total or in part, the most recent editions of the following standards:

      API

      Bul 5A2 Bulletin on Thread Compounds for Casing, Tubing, and Line Pipe

      Bul 5C2 Bulletin on Performance Properties of Casing, Tubing, and Drill Pipe

      UNCONTROLLED COPY--Copyright 1999 American Petroleum Institute

      1

      Bul 5C3 Bulletin on Formulas and Calculations for Casing, Tubing, Drill Pipe, and Line Pipe Properties

      RP 7G Recommended Practice for Drill Stem Design and Operating Limits

      Spec 5B Specification for Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads

      Spec 5CT Specification for Casing and Tubing

      AWS1

      Spec A5.1 Covered Carbon Steel Arc Welding Electrodes


    2. REQUIREMENTS

      Requirements of other standards included by reference in this recommended practice are essential to the safety and interchangeability of the equipment produced.


    3. EQUIVALENT STANDARDS

      Other nationally or internationally recognized stan- dards shall be submitted to and approved by API for inclu- sion in this recommended practice prior to their use as equivalent standards.


  3. Definitions

    1. shall: is used to indicate that a provision is mandatory.

    2. should: is used to indicate that a provision is not man- datory, but recommended as good practice.

    3. may: is used to indicate that a provision is optional.


  4. Running and Pulling Casing


    1. PREPARATION AND INSPECTION BEFORE RUNNING

4.1.1 New casing is delivered free of injurious defects as defined in API Specification 5CT and within the practical limits of the inspection procedures therein prescribed. Some users have found that, for a limited number of critical well applications, these procedures do not result in casing suffi- ciently free of defects to meet their needs for such critical applications. Various nondestructive inspection services have been employed by users to ensure that the desired quality of


1American Welding Society, 550 N.W. LeJeune Road, P.O. Box 351040, Miami, Florida 33135.