SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
ULC 102.2 Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies (CAN/ULC S102.2-10) standard by Underwriters Laboratories of Canada, 07/01/2010 Full Description This Standard is applicable to the...
ULC 112.1 Standard for Leakage Rated Dampers for Use in Smoke Control Systems (CAN/ULC S112.1-10) standard by Underwriters Laboratories of Canada, 07/01/2010 Full Description The requirements in this Standard cover dampers intended for use in heating, ventilating and air...
ULC 102.4 Standard Method of Test for Fire and Smoke Characteristics of Electrical Wiring, Cables and Non-Metallic Raceways (CAN/ULC S102.4-10) standard by Underwriters Laboratories of Canada, 07/01/2010 Full Description This edition has incorporated requirements for...
ULC Subject 107 Methods of Fire Tests of Roof Coverings (Bulletin, 6/30/2010) standard by Underwriters Laboratories of Canada, 06/30/2010
ULC Subject 112 Standard Methods of Fire Test of Fire-Damper Assemblies M‚thode normalis‚e d'essai de comportement au feu des registres coupe-feu (Bulletin, 6/30/2010) standard by Underwriters Laboratories of Canada, 06/30/2010
ULC 112 Standard Methods of Fire Test of Fire-Damper Assemblies (CAN/ULC S112-10) standard by Underwriters Laboratories of Canada, 06/01/2010 Full Description These requirements and methods of test apply to fire damper assemblies rated 3/4 h, 1 h, 1 1/2 h, 2 h, or 3 h...
ULC 702.2 Mineral Fibre Thermal Insulation for Buildings, Part 2: Application Guidelines standard by Underwriters Laboratories of Canada, 2010 Full Description These Guidelines specify the requirements for installation of mineral fibre thermal insulation products for...
ULC 716.2 Standard for Exterior Insulation and Finish Systems (EIFS) - Installation standard by Underwriters Laboratories of Canada, 2010 Full Description This Standard contains requirements for the installation of Exterior Insulation and Finish Systems (EIFS) that meet...
ULC S601-00 Standard for Shop Fabricated Steel Aboveground Horizontal Tanks for Flammable and Combustible Liquids standard by Underwriters Laboratories of Canada, 01/01/2000 Full Description These requirements cover single and double wall cylindrical horizontal steel...
ULC S603-00 Standard for Steel Underground Tanks for Flammable And Combustible Liquids standard by Underwriters Laboratories of Canada, 01/01/2000
ULC 139 Standard Method of Fire Test for Evaluation of Integrity of Electrical Cables standard by Underwriters Laboratories of Canada, 01/01/2000
ULC 20 Standard for Fire Hydrants standard by Underwriters Laboratories of Canada, 12/01/1999