SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI TIP 0404-68 The Impact of Pressing on Web Densification standard by Technical Association of the Pulp and Paper Industry, 11/08/2021 Full Description This TIP discusses the effect of critical web, felt and press configuration parameters and their effect on final...
TAPPI T 425 om-21 Opacity of paper (15/d geometry, illuminant A/2*, 89% reflectance backing and paper backing) standard by Technical Association of the Pulp and Paper Industry, 2021 Full Description Opacity is a fundamental optical property of paper as a whole, yet the...
TAPPI T 566 om-21 Bending Resistance (Stiffness) of Paper (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration) standard by Technical Association of the Pulp and Paper Industry, 2021 Full Description This test method covers a procedure used to measure the...
TAPPI T 411 om-21 Thickness (Caliper) of Paper, Paperboard, & Combined Board standard by Technical Association of the Pulp and Paper Industry, 2021 Full Description This method describes the procedure for measuring single-sheet thickness and variations in single...
TAPPI T 423 cm-21 Folding Endurance of Paper (Schopper Type Tester) standard by Technical Association of the Pulp and Paper Industry, 11/01/2021 Full Description This method describes the use of the Schopper type of folding apparatus. It is suitable for papers having a...
TAPPI T 476 om-21 Abrasion Loss of Paper and Paperboard (Taber-Type Method) standard by Technical Association of the Pulp and Paper Industry, 2021 Full Description This method determines the resistance of paper and paperboard surfaces to the action of abrasion, either...
TAPPI T 448 om-21 Water Vapor Transmission Rate of Paper and Paperboard at 23 degrees C and 50% RH standard by Technical Association of the Pulp and Paper Industry, 2021 Full Description This method provides for the gravimetric determination of the water vapor...
TAPPI T 227 om-21 Freeness of Pulp (Canadian Standard Method) standard by Technical Association of the Pulp and Paper Industry, 2021 Full Description The freeness of pulp is designed to give a measure of the rate at which a dilute suspension of pulp (3 g of pulp in 1 L...
TAPPI T277 sp-21 Macro Stickies Content in Pulp: the "Pick-up" Method standard by Technical Association of the Pulp and Paper Industry, 2021 Full Description This standard practice describes removing and preparation of a test specimen that can be analyzed for...
TAPPI T 200 sp-21 Laboratory Beating of Pulp (Valley Beater Method) standard by Technical Association of the Pulp and Paper Industry, 11/01/2021 Full Description This procedure is used to define the papermaking quality of pulp, by subjecting it to a controlled mechanical...
TAPPI T 577 om-21 Score bend test standard by Technical Association of the Pulp and Paper Industry, 2021 Full Description This procedure is used to determine the score bend resistance of a scored and unscored sample of a paperboard carton. Score bend resistance of a...
TAPPI T 573 sp-21 Accelerated temperature aging of printing and writing paper by dry oven exposure apparatus standard by Technical Association of the Pulp and Paper Industry, 11/01/2021 Full Description This standard practice describes a laboratory procedure for...