SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI T 621 Analysis of Rosin standard by Technical Association of the Pulp and Paper Industry, 01/01/2001 Full Description Rosin is a natural resin obtained as a vitreous water-insoluble material from pine oleoresin by removal of the volatile oils or from tall oil by...
TAPPI T619 Analysis of Salt Cake standard by Technical Association of the Pulp and Paper Industry, 01/01/2001 Full Description The principal use of salt cake in the pulp and paper industry is in the manufacture of sulfate pulp. Salt cake is an anhydrous sodium sulfate...
TAPPI T618 Analysis of Limestone standard by Technical Association of the Pulp and Paper Industry, 01/01/2001 Full Description This method is for the analysis of limestone as used in current sulfite pulping practice.Limestone may be in the calcite form (high in calcium)...
TAPPI T617 Analysis of Lime standard by Technical Association of the Pulp and Paper Industry, 01/01/2001 Full Description "Available lime index," expressed as a percentage of calcium oxide, is a measure of the alkaline content of high calcium quicklime and hydrated lime...
TAPPI T261 cm-00 Fines Fraction by Weight of Paper Stock by Wet Screening standard by Technical Association of the Pulp and Paper Industry, 05/02/2000 Full Description This method is designed to measure the fines content of paper stock or of pulp samples by means of a...
TAPPI T249 cm-00 Carbohydrate ition of Extractive-free Wood and Wood Pulp by Gas-liquid Chromatography standard by Technical Association of the Pulp and Paper Industry, 04/03/2000 Full Description This method (1, 2) is used to determine the five principal monosaccharides...
TAPPI T569 om-00 Internal Bond Strength (Scott type) standard by Technical Association of the Pulp and Paper Industry, 03/03/2000 Full Description ScopeThis method defines a test that measures the energy required to rapidly delaminate a sheet-type specimen. The Z...
TAPPI T254 cm-00 Cupriethylenediamine De Viscosity of Pulp (Falling Ball Method) standard by Technical Association of the Pulp and Paper Industry, 01/07/2000 Full Description This method describes a rapid, procedure (1, 2, 3) for the measurement of the viscosity of 1%...
TAPPI T 235 cm-00 Alkali Solubility of Pulp at 25 Degrees C standard by Technical Association of the Pulp and Paper Industry, 01/01/2000 Full Description This method for determination of alkali solubility can be applied to bleached and delignified pulps only.Lignin...
TAPPI TIP0404-05 Methods of Evaluating High-Velocity Dryers standard by Technical Association of the Pulp and Paper Industry, 01/01/2000 Full Description The purpose of this TIP is to provide guidelines to evaluate the performance of high velocity air impingement dryers...
TAPPI T507 cm-99 Grease Resistance of Flexible Packaging Materials standard by Technical Association of the Pulp and Paper Industry, 12/15/1999 Full Description This method describes an accelerated test designed to measure the transudation of oily or greasy constituents...
TAPPI T279 pm-99 [ Withdrawn ] Effective Fiber Length Index by Zero/Short -Span Tensile Testing standard by Technical Association of the Pulp and Paper Industry, 11/26/1999 Full Description This method provides a measure of the effective length of the...