SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
b For materials whose strength has...
TAPPI T552 [ Withdrawn ] Determination of Wetting Tension of Polyolefin Films and Coated Surfaces via the Mayer Rod Technique standard by Technical Association of the Pulp and Paper Industry, 05/01/2002 Full Description The method indicates the relative...
TAPPI T 822 Ring Crush of Paperboard (Rigid Support Method) standard by Technical Association of the Pulp and Paper Industry, 05/01/2002 Full Description The ring crush test correlates with edgewise compression strength of paperboard(1).This method is intended for...
TAPPI T 527 om-02 Color of Paper and Paperboard (d/0, C/2) standard by Technical Association of the Pulp and Paper Industry, 05/01/2002 Full Description method specifies a procedure for measuring the color of paper or paperboard with tristimulus filtercolorimeters or...
TAPPI T 525 Diffuse Brightness of Pulp (d/0 Degrees) standard by Technical Association of the Pulp and Paper Industry, 05/01/2002 Full Description This method is to be used to evaluate the diffuse blue reflectance factor (diffuse brightness) of pulp by measuring...
TAPPI T524 Color of Paper and Paperboard (45 Degrees/0 Degrees Geometry) standard by Technical Association of the Pulp and Paper Industry, 05/01/2002 Full Description This method specifies a procedure for measuring the color of paper or paperboard with tristimulus filter...
TAPPI T483 cm-02 Odor of Packaging Materials standard by Technical Association of the Pulp and Paper Industry, 04/24/2002 Full Description The presence of foreign or objectionable odors in packaging materials which are to be used near food, drugs, etc., may be a serious...
TAPPI T433 cm-02 Water Resistance of Sized Paper and Paperboard (Dry Indicator Method Acid-Soluble Iron in Paper standard by Technical Association of the Pulp and Paper Industry, 04/24/2002 Full Description This method is based on the dry-indicator method of Carson (1-4)...
TAPPI T 400 Sampling and accepting a single lot of paper, paperboard, containerboard, or related product standard by Technical Association of the Pulp and Paper Industry, 04/01/2002 Full Description 1.1 This method describes procedures for obtaining a sample for testing....
TAPPI T 684 Gross heating value of black liquor standard by Technical Association of the Pulp and Paper Industry, 04/01/2002 Full Description 1.1 This method determines the gross (or high) heating value of black liquor, containing up to 55% by mass of water, derived from...
TAPPI T536 Resistance of paper to passage of air (high-pressure Gurley method) standard by Technical Association of the Pulp and Paper Industry, 04/01/2002 Full Description 1.1 This method is used to measure the air resistance of approximately 6.4 sq. cm. (1 sq. in.)...
TAPPI T530 Size test for paper by ink resistance (Hercules-type method) standard by Technical Association of the Pulp and Paper Industry, 04/01/2002 Full Description This method (1-3) measures the resistance of paper to permeation of an aqueous penetrant and is a...
TAPPI TIP0404-59 Methods to minimize sheet rewet in the press section standard by Technical Association of the Pulp and Paper Industry, 02/01/2002 Full Description This TIP discusses intra-nip and post-nip rewet of paper in press nips and reviews options to minimize...