SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
b For materials whose strength has...
TAPPI TIP0404-62 Index of suppliers for press section monitoring standard by Technical Association of the Pulp and Paper Industry, 09/27/2002 Full Description The purpose of this TIP is to provide resource information for press section monitoring, as described in TIP...
TAPPI TIP0416-11 Recommended test procedure for black liquor evaporators standard by Technical Association of the Pulp and Paper Industry, 09/27/2002 Full Description Procedures used to measure the performance of black liquor evaporators and concentrators have...
TAPPI TIP0416-09 Collection and burning of concentrated noncondensible gases: regulations, design and operation standard by Technical Association of the Pulp and Paper Industry, 09/27/2002 Full Description Typical design and operating information concerning the...
TAPPI TIP 0402-20 [ Withdrawn ] GTAW Root Pass Welding of 6% Molybdenum Austenitic Stainless Steel Pipe - - Open Root Joint with Hand-Fed Filler - WITHDRAWN standard by Technical Association of the Pulp and Paper Industry, 09/27/2002 Full Description This...
TAPPI TIP 0304-04 Corrugated Caliper: Why is it so Important? standard by Technical Association of the Pulp and Paper Industry, 09/26/2002 Full Description Corrugated is a very popular packaging material primarily because it has a high strength-to-weight ratio. What...
TAPPI TIP 0416-10 Stripping of kraft pulping process condensates: regulations, design and operation standard by Technical Association of the Pulp and Paper Industry, 09/26/2002 Full Description Basic regulations concerning the collection and stripping of foul pulping...
TAPPI TIP0408-01 Checklist for a properly planned project standard by Technical Association of the Pulp and Paper Industry, 09/26/2002 Full Description This Technical Information Paper is an instrument for guiding and auditing the planning phase of capitalproject...
TAPPI TIP 0416-08 [ Withdrawn ] Guidelines for replacement of generating bank tubes with expanded joints in two-drum boilers standard by Technical Association of the Pulp and Paper Industry, 09/26/2002 Full Description This Technical Information Paper...
TAPPI TIP 0304-15 Statistical Process Control of Starch Viscosity standard by Technical Association of the Pulp and Paper Industry, 09/26/2002 Full Description Control of the viscosity of a starch-based corrugating adhesive is critical to controlling the operation of the...
TAPPI TIP0306-09 Ink Metering Systems for Corrugated Flexo Presses standard by Technical Association of the Pulp and Paper Industry, 09/26/2002 Full Description Flexographic ink metering contains an anilox roll that is engraved for holding precise amounts of ink. There...
TAPPI TIP0607-15 Specific Heat of Sodium Carbonate Solution standard by Technical Association of the Pulp and Paper Industry, 09/02/2002 Full Description The specific heat of sodium carbonate solutions over the range of oncentrations from 0 to 20% sodium carbonate in...
TAPPI TIP0607-16 Vapor Pressure of Sodium Carbonate Solution standard by Technical Association of the Pulp and Paper Industry, 09/02/2002 Full Description The vapor pressure of sodium carbonate solutions of 20% to 30% concentration at temperatures from 15 degrees C to...