SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
TAPPI TIP 0404-63 Paper Machine Energy Conservation standard by Technical Association of the Pulp and Paper Industry, 07/08/2003 Full Description The paper mill area is a major energy consumer in most pulp and paper mills. Efforts to reduce energy consumption can reduce...
TAPPI T571 Diffuse brightness of paper and paperboard (d/0) standard by Technical Association of the Pulp and Paper Industry, 06/24/2003
TAPPI T1215 The determination of instrumental color differences standard by Technical Association of the Pulp and Paper Industry, 06/23/2003 Full Description Scope:This standard practice provides a general introduction to the use of color differences and a list of the...
TAPPI TIP0502-11 Weight of Newsprint Rolls standard by Technical Association of the Pulp and Paper Industry, 06/18/2003 Full Description To provide a graphic representation of the relationship between the diameter and width of a newsprint roll and that roll's...
TAPPI T653- June 2003 Specular Gloss of Paper and Paperboard at 20 Degrees standard by Technical Association of the Pulp and Paper Industry, 06/16/2003 Full Description 1.1 This method is for the measurement of the specular gloss of high-gloss papers at 20 degrees (70...
TAPPI T1216 Indices for Whiteness, Yellowness, Brightness, and Luminous Reflectance Factor standard by Technical Association of the Pulp and Paper Industry, 06/01/2003 Full Description White is the color of purity or freshness and of cleanness. The consumer judges the...
TAPPI T 829 Score Quality Test standard by Technical Association of the Pulp and Paper Industry, 06/01/2003 Full Description This procedure describes a qualitative method for evaluating the relative quality of scores in corrugated containers....
TAPPI T698 [ Withdrawn ] Determination of Wetting Tension of Polyethylene and Polypropylene Films and Coatings (Modified Visking Analytical Technique) standard by Technical Association of the Pulp and Paper Industry, 06/01/2003 Full Description This method...
TAPPI T 838 cm-03 Edge Crush Test Using Neckdown standard by Technical Association of the Pulp and Paper Industry, 06/01/2003 Full Description This method describes a procedure for determining the edgewise compressive strength, parallel to the flutes, of a short column...
TAPPI T 832 Water absorption of corrugating medium: float curl method standard by Technical Association of the Pulp and Paper Industry, 06/01/2003 Full Description The water absorptivity of corrugating medium is measured by floating a specimen on the surface of a vessel...
TAPPI T812 Ply Separation of Solid and Corrugated Fiberboard (Wet) standard by Technical Association of the Pulp and Paper Industry, 06/01/2003 Full Description This method describes a laboratory test for evaluating the resistance to ply separation of solid or corrugated...
TAPPI T 456 om-03 Tensile breaking strength of water-saturated paper and paperboard ("wet tensile strength") standard by Technical Association of the Pulp and Paper Industry, 05/13/2003 Full Description Specimens are selected in accordance with TAPPI T 400...