SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
IEST RP-CC024.1 Measuring & Reporting Vibration in Microelectronic Facilities Recommended Practice by Institute of Environmental Sciences and Technology, 12/01/2002 Full Description Equipment used in the manufacture, measurement, and inspection of integrated circuits...
ISA 61010-1 (82.02.01) Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements standard by The International Society of Automation, 10/28/2008 Full Description This standard specifies general safety...
IES SEM-4-IM-14 IES Seminar - Lighting Controls For Non-Residential Building - Instructor's Manual Training Material by Illuminating Engineering Society, 2014 Craig DiLouie, LC, Principal, ZING Communications, Inc. Full Description This document is for the...
IEST RP-CC020.2 Substrates & Forms for Documentation in Cleanrooms Recommended Practice by Institute of Environmental Sciences and Technology, 11/01/2002 Full Description IEST RP-CC020.2 applies to substrates and forms used in cleanrooms for the purpose of...
ISA 75.10.01-2008 General Requirements for Clamp or Pinch Valves standard by The International Society of Automation, 10/28/2008 Full Description This document applies to valves, sizes 1 inch through 26 inches, of the clamp or pinch valve design, incorporating clamp or...
IES LM-65-14 Life Testing of Single-Based Fluorescent Lamps standard by Illuminating Engineering Society, 2014 Full Description This approved method describes the procedures to be followed and the precautions to be observed in obtaining uniform and reproducible life test...
IEST RP-CC028.1 Minienvironments Recommended Practice by Institute of Environmental Sciences and Technology, 05/01/2002 Full Description IEST RP-CC028.1 provides a framework for describing minienvironments for microelectronics and similar applications. It is intended to...
ISA 60079-7 (12.16.01)-2008 (R2013) Explosive Atmospheres - Part 7: Equipment Protection by Increased Safety "E" standard by The International Society of Automation, 10/15/2008 Full Description This standard specifies the requirements for the design,...
IES RP-3-13 American National Standard Practice on Lighting for Educational Facilities standard by Illuminating Engineering Society, 2014 Full Description This Recommended Practice was developed to enable school and college administrators to understand the importance of...
IEST RP-CC018.3 Cleanroom Housekeeping - Operating & Monitoring Procedures Recommended Practice by Institute of Environmental Sciences and Technology, 01/01/2002 Full Description This IEST Recommended Practice is intended to provide guidance for maintaining a...
ISA 12.22.01-2005 Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Flameproof 'd' standard by The International Society of Automation, 08/15/2008 Full Description This standard contains specific requirements...
IES LM-66-14 Electrical and Photometric Measurements of Single-Based Fluorescent Lamps standard by Illuminating Engineering Society, 2014 Full Description This approved method describes the procedures to be followed and the precautions to be observed in obtaining uniform...