SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
IES LM-31-20 Approved Method: Photometric Testing for Roadway and Area Lighting Luminaires Using Incandescent or High Intensity Discharge Lamps standard by Illuminating Engineering Society, 02/07/2020 Full Description This document defines adequate and uniform methods...
INCITS 20-1967(R1995) Take-up Reels for One Inch Perforated Tape for Information Interchange (formerly ANSI X3.20-1967(R1995)) standard by InterNational Committee for Information Technology Standards (formerly NCITS), 01/01/1967 Full Description This standard covers the...
ISA 60079-29-1 (12.13.01)-2013 Explosive Atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases standard by The International Society of Automation, 06/26/2013 Full Description This part of ANSI/ISA-60079-29 specifies general...
IEST G-CC035.1 Design Considerations for AMC Filtration Systems in Cleanrooms Recommended Practice by Institute of Environmental Sciences and Technology, 07/01/2009 Full Description This Guideline provides information for designing filtration systems to eliminate trace...
INCITS TR-30-2002 INCITS Technical Report for Information Technology - Fibre Channel - Methodologies for Interconnects (FC-MI) standard by InterNational Committee for Information Technology Standards (formerly NCITS), Full Description This technical report specifies...
ISA 12.12.01-2013 Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations standard by The International Society of Automation, 06/13/2013 Full Description The purpose of this standard is to...
IEST RP-CC032.1 Flexible Packaging Materials for Use in Cleanrooms and Other Controlled Environments Recommended Practice by Institute of Environmental Sciences and Technology, 06/01/2009 Full Description IEST RP-CC032.1 provides guidance for the selection of flexible...
IES LM-28-20 Approved Method: Guide for the Selection, Care, and Use of Electrical Instruments in the Photometric Laboratory standard by Illuminating Engineering Society, 02/07/2020 Full Description This document describes terms used to define instrument capabilities for...
INCITS 416-2006 Information technology - Fibre Chanel Protocol for SCSI, Third Version (FPC3) standard by InterNational Committee for Information Technology Standards (formerly NCITS), Full Description This standard describes the frame format and protocol definitions...
ISA 12.01.01-2013 Definitions and Information Pertaining to Electrical Equipment in Hazardous (Classified) Locations standard by The International Society of Automation, 05/29/2013 Full Description This document provides general guidance for safe design, installation,...
IEST RP-CC002.3 Unidirectional Flow Clean-Air Devices Recommended Practice by Institute of Environmental Sciences and Technology, 03/01/2009 Full Description REPLACED 04/01/2016 by IEST RP-CC002.4: Unidirectional Flow, Clean-Air DevicesThis document is no longer being...
IES LM-20-20 Approved Method: Photometry of Reflector Type Lamps standard by Illuminating Engineering Society, 02/07/2020 Full Description This document describes photometric testing procedures and reporting guidelines for reflector type lamps and LED based lamps that...